Hey everyone,

Was replacing my ignition switch (no crank, no start issue) and found that the previous owner did a hack job of the wiring. So I would like to get a schematic so I know what wires are doing what, and I can get it all put back together nicely.


Here are some pics of what they had tied into the ignition switch wiring. I have no idea what the white, blue, or brown wires are for. All they did was strip a bit of the wire, and wrap the bare end around it then cover with electrical tape.








I also found these two yellow relays hanging out, not sure if they are part of the ignition/starter circuit or not. If anyone knows what these might be for, or has a schematic so I can make sure they are wired properly, I would really appreciate that as well.





Thanks for your time. I am a bit of a noob when it comes to electrical, but would really like to get my car running.

It has a B18 swap and they already deleted the clutch safety switch somehow.

 

I think I may have found the correct diagram, all the wire colors match up. So it looks like they only tapped into accessory power, and ignition (on) power.




It looks like I need to follow the blk/wht wire to find the starter relay, and figure out how they bypassed the clutch interlock switch.