When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FS: OEM Engine Mounts
(U.K. Seller)
Removed from my '96 Spec JDM with approx 70k miles on them. Honestly, I could not tell or feel any difference after fitting brand new ones. They are in great shape.
$130 the lot.
OR
$40 Gearbox mount
$40 Rear mount
$65 Side mount
I have two sets of CW ITR wheels that I can live without.
1. Track set, finish is pretty much toast but I never attempted to clean them, one of the rims has a bend and does not balance perfectly. No cracks etc. I burned through last bit of the tires at this years EXPO so the tires are off. I got these from Conley who i believe bought them from Steve. 300 Plus shipping
2. Nice set that I received from HMO motors last year, they come with snow tires with 80% tread left. NO bends, cracks, or curbs. There are some areas that the finish has been touched up that could be redone. (I received them this way) 600 Plus shipping
3. OEM Oil pan with password JDM oil baffles. No leaks or dents. 150[img]
[/img]
Last edited by oldintegrao; Feb 15, 2017 at 06:25 PM.
WTB: No longer available through Honda or Acura. U.K member looking for someone in the U.S who would grab these parts from a local scrapyard/Pull-A-Part place. Willing to send beer money in return for the favour, along with money for the part and postage to the U.K.
Non A/C harness blank/dummy plug and a blank switch from a non A/C set of heater controls from a DC2 Integra.
Front and Rear OEM 5x114.3 Acura Integra Type R hubs w/ ARP extended studs. Front hubs are 32mm and rears have NTN bearings. Great shape, no issues at all. I restored every piece of my car's suspension recently and kept the OEM studs that came with my new hubs.
SOLD
Last edited by Built2grind; Feb 11, 2017 at 05:10 PM.
I've got JDM ITR intake arms for sale. $70 each shipped via usps priority mail.
Got two complete ITR intake arms with airbox and air filter available. $120 each shipped for those. The boxes show some wear from being thrown around over the years, but if you need it, these will work great.
Also, I'm looking for a set of matte black TE37SL's 15x8 5x114.3
Located in Richmond VA - Willing to ship and or meet up. Paypal verified.
FS: $500 Shipped - Mugen DC2 ITR intake. Complete kit (filter is in there also). No issues what so ever - Some light scratches but nothing to be concerned about.
FS: $475 - PIC Select R3 12k/14k. Included is extra top hats (2) with bushings/insulators, and (2) Extra sets of locking rings. These functioned just fine on my ITR- unknown mileage- but they appear to be in good shape. I ran them for less than 1300 miles but they were on my ITR when purchased. No leakage to my knowledge and the adjustment ***** click fine. Probably due for some new lower bushings on the rear eyes as I noticed they are not in perfect shape- But I did not notice this until I removed them and they worked fine on my ITR until removed. One of the rear locking rings is very tough to move for adjustment (But new ones are included). Prefer pick up but willing to ship.
FS: NEW B-Series Outer Transmission Casing $450 + shipping
OEM Integra Type R LSD approx 30k miles $435 + shipping it is missing the ring gear you will have to source another to fit, 4.4 final drive not included.
Hawk HP Plus Front & Rear Brake Pads $115 + shipping
OEM USDM Exhaust. Selling catback exhaust for 300
OEM Catalytic Convertor asking 200
vibrant 4-1 header asking 200. Prices are negotiable Prefer pickup and can meet up within reasonable distance. Located in crystal river Florida. I can send more pictures if necessary. Exhaust roughly has 115k miles on it. Actual mileage is unknown as it sat in the garage most of its life with me but I have no ideas with previous owners
Last edited by typer_696; Feb 27, 2017 at 06:10 AM.
Reason: Adding comments
re: Parts For Sale and WTB: Jan/Feb/March 2017
[/img]
[/img]
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/DB95880D-A88B-4AA3-946C-556B4CAE6F36.jpg.html")
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/4A5A07F1-7440-4190-BF09-31823FCB5087.jpg.html")
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/A99F1A87-9E93-42E8-B6C4-C08FAF546C2E.jpg.html")
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/041AE1D1-6767-4649-AF27-F48F0197B855.jpg.html")
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/FBA4BFD0-69A4-4314-8D4E-053D4ED1B791.jpg.html")
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/A35366C2-C699-4FC9-AD6C-DDBA7107E967.jpg.html")
![](https://honda-tech.com/forums/"http://s219.photobucket.com/user/atc5photos/media/0F3E466E-466C-4505-89E4-E987069F0E70.jpg.html")
![](https://honda-tech.com/forums/"https://honda-tech.com/forums/"http://s1294.photobucket.com/user/beezracing1/media/Parts%20for%20Sale/spoon-dc2%2011_zps349wwdco.jpg.html"")
