When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by tnecniv
First off, do ALL JDM ITR Cats have a hole in them for o2 sensors or do some years not have them? We had to weld a bung for the o2 in the b-pipe a few inches after the cat. Now getting CEL code p0420 but it might be from a leaking header gasket. (Any recommendations for a header gasket? My brother thinks we need a 3 ply)..
We're having fitment issues. We had to lengthen the b-pipe by 2 and 1/4 inches. We even tried pushing the muffler towards the front as much as we could and it was hitting my Eibach rear sway bar before it could reach all the way to the b-pipe.
The only thing I can think of that's wrong is maybe the 00-01 DB8s have the hangars in different spots..
In conjunction with the correct obd2 converter. Hopefully that should help.
If you have the resources, then making a piece like that would allow you to keep the factory b-pipe unmodified and solve the gap between exhaust components. Just get 2 flanges, exhaust piping, gaskets, and measure up the distance you need to fill.
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by EnjoyTheRideDC2
If you have the resources, then making a piece like that would allow you to keep the factory b-pipe unmodified and solve the gap between exhaust components. Just get 2 flanges, exhaust piping, gaskets, and measure up the distance you need to fill.
Damn. Wish I would have known about this before. Unfortunately we ran into the problem at a Bentley dealership that my friend works at and the shop was supposed to be closed, so we had to get my car out of there and now my OEM b-pipe has an extention welded on
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by tnecniv
Damn. Wish I would have known about this before. Unfortunately we ran into the problem at a Bentley dealership that my friend works at and the shop was supposed to be closed, so we had to get my car out of there and now my OEM b-pipe has an extention welded on
There's nothing wrong with your setup...besides, how often do you look under your car?
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by EnjoyTheRideDC2
If you have the resources, then making a piece like that would allow you to keep the factory b-pipe unmodified and solve the gap between exhaust components. Just get 2 flanges, exhaust piping, gaskets, and measure up the distance you need to fill.
I don't have the resources to weld so I buy whatever is available.
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by EnjoyTheRideDC2
Nothing wrong with that. But I'm sure there's a muffler shop somewhere nearby you.
Yeah, would be loud getting there. They might not charge as much as that adapter, but its peace of mind knowing that the welds will hold up. They have similar products on ebay for different sizes, 2.5 and 3 inches plus cheaper than the tanabe one.
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by qwk db8
Wow this is getting Complicated.. Just tow the car to the muffler shop.
Not really...The issue has been resolved. Tony is justifying the choice of purchasing a pre-made muffler extension over having a muffler shop weld one together. That's all.
Re: DB Squad.....for the Teggers with 2 extra doors
Nothing complicated.
Just pointing out options for us DB lovers. I wish I had my pictures of my sisters db7, I put alot of time and blood on that sucker. Kinda glad that I did because it lasted another additional 10+ yrs and still going even though its a 95 special edition.
Re: DB Squad.....for the Teggers with 2 extra doors
How do those quick release bumper locks work? Still trying to figure out how it makes removing the bumper any quicker. I assume the locks replace the use of the phillips head screws that secure the ends of the bumper to the fenders?
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by EnjoyTheRideDC2
How do those quick release bumper locks work? Still trying to figure out how it makes removing the bumper any quicker. I assume the locks replace the use of the phillips head screws that secure the ends of the bumper to the fenders?
honestly they don't work that great, i got these from home depot for like 5 bucks as a quick fix so my bumper wouldn't hang. my tabs are broken and the OEM screw and plastic won't hold.
Re: DB Squad.....for the Teggers with 2 extra doors
Hey guys,
I've grown a liking to the DB's over the years since I got mine in 2012. Seems like I'm never finished and strangely enough I'm okay with that. Gives me something to look forward to I guess. Wanna shave my doors soon among many things! I'm always on the hunt for DB parts locally so feel free to hit me up if there's parts you need.
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by tylerg6254
Hey guys,
I've grown a liking to the DB's over the years since I got mine in 2012. Seems like I'm never finished and strangely enough I'm okay with that. Gives me something to look forward to I guess. Wanna shave my doors soon among many things! I'm always on the hunt for DB parts locally so feel free to hit me up if there's parts you need.
Anyways DB Squad...
I WANT IN!!!
whats good!? Welcome. It's nice to see you post. I always see you posting nice DB stuff for sale on CL locally lol. .. We plan on having a DB BBQ soon.. I'll keep you in the loop if interested.
Re: DB Squad.....for the Teggers with 2 extra doors
Originally Posted by DBiNfEcTeD*
whats good!? Welcome. It's nice to see you post. I always see you posting nice DB stuff for sale on CL locally lol. .. We plan on having a DB BBQ soon.. I'll keep you in the loop if interested.
Re: DB Squad.....for the Teggers with 2 extra doors
Did any of you buy this 2001 db8 original nighthawk black pearl db8 in socal? Has factory black /gray leather interior.. was for sale a few days ago. If so let me know i will pay u more than u bought it. I need it. Lol