So the hubs on my 92 hatch are worn out and I need to replace all four, however I am confused on what hubs to get since its the JDM civic not a NA civic. It has rear disk brakes as well, not sure if thats stock or swapped in. Any help is much appreciated.

 

Why do you think the hubs are worn out?

 

Thanks for the diagrams but they do not help me. The shop I took the car to said the bearings were shot, also the threading for the wheel studs on the hub are stripped so the wheel studs just spin freely in the hub so I'm looking to replace the bearing and the hub.

 

Get a second opinion on the car.

 

No need to replace the hubs just because studs are bad. Studs are cheap. So again, why do you believe the hubs are bad?

I posted the diagrams because you seem not know the names of the required parts or which ones, if any, are bad.

As mentioned, get a second opinion from a reputable shop. You don't need the expertise of this forum if you just choose a good shop.

 

Its a waste of time, it is very clear i need new wheel hubs, all the studs spin in the hubs because the hubs are stripped. I would just like to know which ones i need.

 

You're wasting our time. Locked.