ok so I bought a rear disc conversion from a guy. He said it was off a 94 integra. I installed the trailing arms and all along with new brake lines only to find out the hubs are wrong! When I put the lock ring on and tighten the axel nut the hub has about a quarter of an inch of inward and out ward play. Now I went to the store and tried every hub from civic to delsol to integra. I can't find the right one. It seems to me he spindle is too long (measures out to an 1 7/8 from the face of the knuckle to the end of the spindle). If anyone has some insight on what hub it could be I'd greatly appriciate it! Thanks.

 

Are you using the washer underneath the axle nut?

#2 on here. I know it's a drum diagram, but you should get the idea.

http://estore.honda.com/honda/parts/...=B++19&dl=#002

 

[QUOTE=98civdx;51061942]Are you using the washer underneath the axle nut?

#2 on here. I know it's a drum diagram, but you should get the idea.

Honda online store : 2000 civic rear brake (drum) (1) parts[/QUOTE

yes I do have the washer under the axle nut.