Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

Loud Noise

Thread Tools
 
Search this Thread
 
Old Aug 22, 2016 | 09:25 AM
  #1  
sah351's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Aug 2016
Posts: 13
Likes: 0
Default Loud Noise

Hey folks so I have a 1999 civic ex with a 176k miles and I've had it since around 130k miles. I've never changed the bearings and to my knowledge they've never been changed.

With that said, there's a noise that starts around 30-40 mph and progressively gets louder as I speed up and it's at it's loudest around 80 mph. The noise gets a little quieter as I go to the right on the freeway but going to left, it becomes louder. I've attached a few videos hoping you can hear the noise in the background.The noise seems to be clearer and more distinct in the last video and it can be heard better with headphones.

Additionally, I've tried wiggling both front wheels to confirm if it is the bearings both they don't move which is why I'm starting to doubt if it is the bearings. Any ideas?

Thanks in advance for the help!
Attached Files
File Type: mov
IMG_3114.MOV (1.94 MB, 22 views)
File Type: mov
IMG_3141.MOV (2.85 MB, 21 views)
Reply
Old Aug 22, 2016 | 09:31 AM
  #2  
gtpilot's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 157
Likes: 0
From: New Braunfels, TX
Default Re: Loud Noise

take a look at your CV joints...
Reply
Old Aug 22, 2016 | 09:34 AM
  #3  
sah351's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Aug 2016
Posts: 13
Likes: 0
Default Re: Loud Noise

Originally Posted by gtpilot
take a look at your CV joints...
Thanks gtpilot. I should've mentioned that the boots are fine but I did replace the passenger side axle earlier this year since the boot was starting to tear. The noise didn't go away and was there before the axle replacement but not to the extent now.
Reply
Old Aug 22, 2016 | 09:43 AM
  #4  
Former User's Avatar
Honda-Tech Member
 
Joined: Feb 2008
Posts: 45,214
Likes: 59
Default Re: Loud Noise

A bad bearing can cause this problem and produce a growling noise.
Reply
Old Aug 22, 2016 | 10:07 AM
  #5  
sah351's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Aug 2016
Posts: 13
Likes: 0
Default Re: Loud Noise

Originally Posted by RonJ
A bad bearing can cause this problem and produce a growling noise.
Right but then how would you explain the tires not moving when I try to wiggle them? Isn' that a sure sign of bearing failure? Which side do you think btw? The noise increase decrease should be indicative of which sign but I'm not sure how to interpret that.
Reply
Old Aug 22, 2016 | 10:16 AM
  #6  
Former User's Avatar
Honda-Tech Member
 
Joined: Feb 2008
Posts: 45,214
Likes: 59
Default Re: Loud Noise

Originally Posted by sah351
Right but then how would you explain the tires not moving when I try to wiggle them? Isn' that a sure sign of bearing failure?


Reply
Old Aug 22, 2016 | 04:38 PM
  #7  
mk378's Avatar
Honda-Tech Member
 
Joined: Feb 2016
Posts: 3,018
Likes: 52
Default Re: Loud Noise

A bad bearing gets noisy. A really bad bearing has play in it.

You should hear almost nothing if you jack up the car and turn the wheel by hand in neutral. Any noise the bearing makes will get a lot worse with the weight of the car on it.

Louder when you go to the left suggests that the problem is on the right side. The weight of the car shifts to the outside of a turn.
Reply
Old Aug 22, 2016 | 06:14 PM
  #8  
sah351's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Aug 2016
Posts: 13
Likes: 0
Default Re: Loud Noise

Thank you gentlemen. Would you recommend I change both sides while I'm at it?
Reply
Old Aug 24, 2016 | 02:39 AM
  #9  
4Xreincarnated's Avatar
B*a*n*n*e*d
 
Joined: Aug 2016
Posts: 4
Likes: 0
Default Re: Loud Noise

Originally Posted by sah351
Thank you gentlemen. Would you recommend I change both sides while I'm at it?
Yes or there will be uneven wear on your ball bearings. When i did them on my truck i did both for peace of mind
Reply
Old Aug 24, 2016 | 08:19 AM
  #10  
kp's Avatar
kp
Honda-Tech Member
15 Year Member
 
Joined: Aug 2008
Posts: 1,197
Likes: 1
From: Ontario, Canada
Default Re: Loud Noise

Originally Posted by 4Xreincarnated
Yes or there will be uneven wear on your ball bearings. When i did them on my truck i did both for peace of mind
What? Uneven wear? Don't listen to this guy OP.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Trevo Badri
Transmission & Drivetrain
2
Apr 4, 2019 12:44 PM
Nicknyce
Acura Integra
3
Jan 16, 2005 10:20 PM
DC5_R
Honda Accord (1990 - 2002)
6
Jun 30, 2003 03:35 AM
Rory Breaker
Acura Integra
19
Mar 17, 2002 12:00 AM




All times are GMT -8. The time now is 03:38 PM.