So my wires in the in the C556 connector (I believe it is where the floor harness connects to the driver door harness) are majorly messed up. Some have broken away from the pins and other are completely broken apart 2 inches away from the connector. It looks like my best options are go to the junkyard and hope to find something similar that I can solder to my old lines. The other option if is repin the connection. So I looked at the diagram and was wondering how to look at it. Should I look at this diagram as if the end of the wires are facing towards me or away from me.

 

At the beginning of the section from which the diagram was taken: