Msd billet distributor PN 8488
Msd Ignition Driver PN 6305
Msd Wires PN 35349

Asking $550 +Paypal

I also have a JDM SIR Del Sol Cluster $300 +Paypal

 

I have a Edelbrock Victor X intake manifold that I was going to use with my GSR head. It is in MINT CONDITION! Plans have changed and I am using a b16 head now on my car. Ideally, I would like to trade for a b16 Victor X manifold or I will take 250 obo + Shipping.

 

Honda Prelude H22 Hytech drag header. Exhausts under the transmission (so you don't have to cut a hole in your bumper)
$800



4 RC Engineering 440cc injectors. Brand new, never used. Still have the flow chart for all 4 injectors.
$250

All brand new, never used gauges:
Autometer Cobalt 6175 air/fuel gauge $40 ($65-80 on ebay)
Autometer Cobalt 6153 oil pressure $140 ($180-200 on ebay)
Autometer Cobalt 6156 oil temp $80 ($120-155 on ebay)

Located in Ontario, Canada. All prices in canadian $$. Prices don't include shipping. PM or email: drc1981@live.com

http://sudbury.kijiji.ca/c-cars-vehi...AdIdZ218850389

 

I am selling a block with rods and crank

K20a3 blockwith css comes with crankshaft $450 Never used

k20 eagle rods $350 New were never ran just were in theblock so they are new.

87.5mm bore cp pistons dished for boost needsrings they cost about $100 from cp these are brand new were just installed into this block but willnot fit back in because bore is to big. $350

I Will post up pics tomorrow!

 

name: brian s.
location: independence (kansas city, mo)
contact: pm or (816) 739 3374 text only please
payment: paypal only, no trades
shipping USPS or UPS

https://honda-tech.com/forums/sale-10/fs-used-%2Ap-i-c-%2A-12k-rear-springs-2822440/
https://honda-tech.com/forums/sale-10/fs-shaved-b-valve-cover-2811992/-- Pending
https://honda-tech.com/forums/sale-10/fs-eg-ex-si-obd1-vtec-engine-harness-uncut-2815602/
Cliffs:
PIC 12K Springs $80 + shipping ($95 shipped usps)
Shaved/Vented VC $125 + shipping ($140 shipped usps)
EX/Si engine harness $100 + shipping ($110 shipped usps)

 

Any ??? Call zakura @978-944-3095 or Tex or pm

1000hp air to water cooler 4.5 thick $200 ship


Auto meter speedometer never use $100ship


Obd1 hondata 4 bar map sensor like new $80 ship

 

MSD 75611 analog programmable rev limiter. i have had thisin my car for 2 seasons, only used 1, wires are as long as i could leave them. they werent cut to fit. works with all analog boxes, using mine on a 6al. we have gone a different route with this. summit has them for 250~ ill let it go for 200 shipped.



http://www.msdignition.com/Products/...v_Control.aspx

 

edelbrock 3811 used 1 season, no tps sensor, 220 shipped



Edelbrock B16 victor x 8 injector manifold - used 2 seasons ported with 70mm flanged welded then ported to 80mm, 80mm holley ford tb brand new never used with vband welded to it then filled and smoothed out. both fuel rails and gauge included. over 1000 invested. will sell 650 shipped, made 900 with 70mm and no porting.

energy suspension integra rear control arm bushings 16.3109r 25 ea 2 sets
t1 b series cam pickup new 400.

 

F.S.
i have a few things i would like to sell so i can build another backDOOR topmount setup. these items are currently in my 83mm 545whp eg racecar and are all in mint or next to mint condition. this setup with a GT35R is holding 19psi perfectly with NO creep. prices do not include shipping. Heres the rundown.....
HEATING
(1) Full-Race ramhorn manifold,T3 flanged with 60mm teardrop wastegate outlet $950
(2) Tial sport 60mm wastegate, silver in color. mint cond with both clamps $480
(3) Custom 3" 4Bolt DP w/flexpipe and WB/02 bung built specifically for the ramhorn heatwrapped $250
(4) Custom 2.5" SS teardrop cut Dumptube,heatwrapped $100
COOLING
(5) Precision 750hp FMIC with fully polished end tanks. comes with custom steel brackets painted black $400
(6) Custom 2.5" Aluminum FMIC piping fully polished with 50mm flange, clamps and cuplers included $300
(7) Garrett GT35R turbo , perfect working condition. feed and drain will be included if requested $900

i will trade for the following :
FULL-RACE topmount, or Frontmount.. maby other brands depending on the quality
Backdoor FMIC
if you need more pics and or info txt me Dan@(570)490-8908

 

Im making some changes and a few things need to go.

Crower billet b18c rods with arp rod bolts, used for one season and never had any problems. $500



Aem Twin Fire ignition, 8 channel. $225 shipped

Aem short pencil coil, I have 8 of these. 4 are brand new, and 4 where used for a couple passes. One of them is dead but the other three work perfect. will throw in the harness I made for the set up.

$200 shipped for all 7

 

:Testing water: For sale is an excellent condition less than 5k miles Garrett GT4294R turbo w/ 1.28 exhaust housing looking for $1800.

: Full-race topmount t4 twin gate divided housing less than 5k miles $1100 obo

: Tial 44mm wastegate black less than 5k miles (2) for $550

: PWR Integra/RSX full size radiator brand new in the box $300

: Full-race pro-am 4" downpipe less than 5k miles $450

: Garrett core 1000hp dual backdoor intercooler w/ 3" endtank outlet/inlet and aluminum 3" charge pipe w/ quick disconnect clamps $1000

: Precision 1600cc low impedance injectors $350

: Carbonetic carbon twin disc clutch used for about 500-700 miles in great condition- $900 shipped.

: (2) Synapse 55mm wastegate in good condition $425 for both shipped.

: ACL standard main and rod bearings and thrust washer set $150 shipped

: Mac valve boost control solenoid for S300 brand new w/ filter and barb fittings $60 shipped.


Pictures are available per request thank you.

 

SOLD

 

Fluidyne Half Style Radiator, -16 outlets, Full Polish, Brand new, $320 Shipped.

Avid B16, -16 Waternecks, Brand new, SOLD.

Turbosmart Race Port BOV, Brand new with flange, SOLD.

Beast B-series starter, lightly used, SOLD.

Gates Kevlar B16 Timing Belt, Brand new, $80 shipped.
Arp Intake or Exhaust Manifold Stud Kit, Brand new, SOLD.

 

used hargett precision 3" clamp. comes with retaining ring 2 o rings and both sides of the coupler. i still need to cut it off my pip. $30 obo

 

FS: 2 year old PWR Radiator w/cap
No leaks
$150.00 Shipped

BR Catch can anodized black and braided line w/drain back
$150.00 shipped

D series valve cover with 10an fittings powder coated wrinkle black
$80 shipped

AEM Boost Solenoid w/ mount
$50 shipped

GM Boost solenoid with pigtail
30 shipped

PM me if interested

 

Posting for a friend selling his racecar chassis. Please email him with any inquiries at S366EK@Hotmail.com

2000 Civic SI with 32K original miles
Brand new PW7 Bright White paint, all glass removed, rack removed, etc. Performed correctly and meticulously.
JoJo Callos 3-piece front end
Seibon carbon hood
Tokico Blues'
Fuel tank sumped, red coated inside for corrosion resistance
Interior immaculate, many panels brand new
NRG Tech 10 point cage

I'm certain I'm missing alot of little details. The owner is a perfectionist and everything was done in the most meticulous way possible. Car is showroom immaculate and would please someone that's searching for something that's nothing short of perfect. Can remove some items to lower the price. $6,500.

 

Random parts around the shop for sale!!!!

Barely used M&W PRO Drag 4 ignition system with MW coils + harness $1200
NIB ACT clutch kit for F22 Accord/Prelude/CL $150
NEW HKS RB26 264 cams $600
NIB CC Twin disc for a b series hydraulic motor $1000
NIB B serie sstage 5 clutch with "X" pressure plate $350
USED tial 40mm wastegates qty 2 with NEW inlet/outlet flanges $150 each
USED b16/LS quaife diff $700
NIB CP pistons 87mm 9:1 for k24 wth K20 head $680 (upgraded wristpins included)
NEW black or Grey k24 scattershields $195
NIB 2003-2007 Dodge Cummins Garrett Turbo upgrade $1200
NIB 2.25 mild steel ubends thin walled $25 each qty 8 avail

 

Stuff I have laying around that needs to go...

Golden Eagle Intake Manifold $400 plus paypal
Borg Warner S372 used for one season. $800 plus paypal

 

EAGLE GSR rods 5/16 bolts just had them checked out at the machine shop there ready to run. 175



AEM EMS this is the same as a 1010 box[obd2b], it has been hall modded was running my k swapped car on this with 8 injectors 500





bosch 044 130

kinsler 25 micron inline fuel filter -10 fittings 100



close up of filter

when it was together

super clean gsr head 80k miles has caps and rails 400



aem wideband 130

 

Parting out my race car. PM me if your interested in anything. TRANS + MOTOR sold as complete!! Im in Central Canada, will ship within north america. Prices + shipping
I HAVE DELETED PARTS THAT ARE SOLD!

1993 Honda Civic H/B
New Bosch Starter b series $100
New Bosch Alternator gsr $100
Dual Sumped (NEW) OEM fuel tank (EG) $100
Custom stainless mig welded Tubular Manifold (front face turbo) T3 flange 38mm w/g $200
Custom stainless tig welded Tubular Manifold (front face turbo) T4 flange 38mm w/g $500
3.5” Turbo downpipe (up pipe.. lol) COMES WITH MANI
2” Wastegate Dump COMES WITH MANI
OEM Rad with hoses $75
DSS 5.9 axels + hubs $1400cad

LS Transmission COMPLETE TRANS - $2000
Liberty Faceplate 1-4 gears
Liberty 5th gear handcuff
New Bearings + Seals
Quaife LSD

Richmond GSR Spool $100
B16A Eagle H-Beams $200
ITR shift linkage + ITR shifter $100
Autometer Gauges
5” Phantom Tach $100
Phantom Oil Pressure (electric) $30
Phantom Water Temp (electric) $30
Phantom Volts $30
Phantom Boost $30
All above gauges - $200
AEM UEGO Wideband O2 (new sensor) $150
Plastic Racing Seat $20
Momo Steering wheel $100
EXIDE 1000ca wet battery (one month old) (78series?) $100
OBD 1 GSR Vtec Dizzy $150
RCI Snell full face helmet $100
RCI Window net $50

rolling chassis - $1000
NHRA Certified Fully welded 8pt roll cage
Custom Fiberglass Front nose
Lexan Windows
Custom Steel Dash
All New – Struts, coil overs, Tie rods, Ball joints, Brakes, Bearings, Bushings, Sway bar links, Brakes, Brake rotors, Brake hoses, ebrake cables, etc.
Race weight was 1900lbs without driver.

GSR SPOOL - with bearings


B16 Eagle H-beams


Fuel tank (no pumps or lines)


Mig welded mani (t3)


Chassis:


Gauges

 

prices are somewhat firm, but feel freeto make reasonable offers

-Alaniz ported b16 head. Came off of a running car, and was milled.. head is fully disassembled, but comes with all rockers/lma’s, matching cam caps, etc.. no valvetrain/valves are included.
-$625 shipped/paypal’d






Rockers/lma’s are soaking in oil in individual bags



-LS/b20 Carrillo Pro-A rods.. some of the BEST all motor rods out there, extremely lightweight.. were used for only ~60 miles before build was given up on and parted out.. still like brand new
-SOLD




-oem GSR (p72) pistons/rods.. motor had 75k on it before dissassembly
-$125 shipped/paypal'd



-Brand new skunk2 carbon composite fuel rail.. end plug was drilled/tapped for a 1/8th npt 90* fitting for a fuel pressure gauge
-$175 shipped/paypal’d




-golden eagle oil squirter plug set.. brand new
-$15 shipped/paypal’d



-used NOS nitrous setup, with plate setup for a GSR.. plate bolts in place of the factory butterflys on stock mani.. really nice setup
-more info on the setup: http://www.hawkinsspeedshop.com/cate...duct-1280.html
-$350 shipped/paypal’d




-Brand new ACT clutch/Fidanza lightweight flywheel combo for b series hydro tranny.. extreme pressure plate with unsprung 6 puck clutch.. includes new throwout/pilot bearings
-$450 shipped paypal’d



-99-00 civic si rear T bracket.. a must for b series into ek
-$35 shipped/paypal’d



-used AEM FPR for d series
-$75 shipped/paypal'd

 

Prices do not include shipping unless stated, I have all the cam cap and hardware for the head

Fully built B16 head ported and polished
Supertech springs and retainers
Supertech inconel valves- $1000

CTR cams- $420 shipped

ARP manifold studs- SOLD

Tilton bleader- $75 shipped

B series valve cover $65

Full-Race cam gears- $175 shipped

Complete head including valve cover- $1650

 

I got couple of my stuff that i want to get rid off.let me know if anybody is interested i am giving great prices

s374 turbo $900 mint an polish compressor housing
gsr eagle big bolts rods mint $250
2.9 level driveshaft axles $ 600

sorry the only pic avalible right know is my turbo.ill post pic of other stuff later my bad!!

 

FS: 96 SFWD EK
$14,000 obo
Chris has decided to sell his car. It made 749 HP spinning on the dyno, within 10 passes it has run 9.70 @ 157. I think it is an easy 9.4X car. Everything in the car has 10-12 passes on it.
It's a 96 EK
Chassis:
Corner scaled by NRGTech over the winter
NRG Tech 10 Point with shroud chute and Window Net
Kirkeys (no covers)
Omnipoint coilovers
Avid Traction Bar
Weld 13X9s with MT 24.5X9X13
Motor:
1.9L GSR (Pauter Rods, CP Pistons (9.0:1), AEBS Sleeves, GSR Head, Ferrea valvetrain with 1mm oversize valves, BC Turbo Cams
T1 Catch Can (All black lines)
Avid Solid Mounts
Drivetrain:
GSR Trans with MFactory Diff
Exedy Twin Disk
DSS 5.9s
Turbo Setup:
Fullrace Top Mount with twin Tial 44s and 4" downpipe
Bullseye S372
Tial BOV
4" intercooler with 3" charge pipe from Turbo->IC, 3.5" from IC->Intake
Edelbrock Intake
Blox TB (I think it is 76)
Custom turbo intake (it is finished...not like in pic)
All vacuum lines are pushlock fittings
Fuel:
RC 1600s
Aeromotive Eliminator, Filter and FPR
-10 Feed, -6 Return (All Black)
Electronics:
FAST SpeedPro EMS
NLR AMS-1000 (Wih CO2 Bottle and cage mount)
MSD 75314 Programmable Digital 7 (the good one)
MSD Coil & Cap
Tach, shift light, Boost, Oil Pressure and H20 Temp

Pics:



Pics:
http://www.youtube.com/watch?v=Ry6kuPr6qqE
http://www.youtube.com/watch?v=okBxXgkTfjc

 

I got a couple parts that I won't be needing!

Precision 1600cc injectors $200
FJO injector driver $100