hey guys i just pickd up a ctr front strut bar for my eg to replace my e-gay one. but i need the hardware... i went to honda and they cant look up ctr's ima go to acura tomorrow and try but anywhere else i can get it from? or if anyone has it layin around let me know

 

I just got a ctr bar for my ek...no hardware either..

 

Just drill the holes marked out on your strut top, and fasten it with 4 bolts from a hardware store.

 

i already have the hole them come predrilled from factory... i just would want oem hardware for instead of random nuts and bolts

 

if you really want oem hardware get hardware for a 99-00 si or from a integra gsr front strut bar.

 

you dont have to get "random"nuts and bolts... get a good grade bolt/nuts

 

If its just the JDM look your going for you can always overnight nuts and bolt from a JDM home depot lol

 

^ Ha.

Afraid you're a bit out of luck here .. the bolts are welded to the body on vehicles with a strut bar from the factory. I wish I could tell you the size of the bolts now, though ... but I did do a little DIY on this topic here: https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/%5Bdiy%5D-92-95-jdm-edm-honda-civic-oem-front-tower-strut-bar-install-2674491/

 

Take the strut bar and go to home depot/Lowe's and get the proper hex bolts and nuts and you are good to go. I did the same and it's been on my hatch for the past 8 years, no problems. Cost me like $2.

 

ok thanks guys.... ima prob get grade 8 hardware from homedepot i guess ... peace guys