IHRTJDM EK Build Up... FINALLY!!
Thread Starter
Honda-Tech Member

Joined: Feb 2006
Posts: 634
Likes: 1
From: Cincinnati, OH, United States
It's finally time for a build thread of my own! Not much but its a work in progress. I'm not as fast as some people (cough cough Kevin) but I'm doing my damn best so back off haha
Anyway bought this car back in June 08' from HT member (ekdj) Drove to New Jersey from Cincinnati and well worth every minute and dollar spent on this car! He had the motor put in prior to me buying it so props to DJ for making my life a little easier lol.
Here is a picture on the drive back from NJ...


Not even on the road for 10 min and Mark aka heel_togue was already under the dash taking it apart lol

Finally back home parked it next to my BELOVED EJ8 :'( So sad to take her apart but we had our fun in the sun!!!


March 09'
It's time to take this thing apart and get some fresh VSM sprayed! First pulled the motor...



And our entertainment for the evening.... lol hahaha


Getting the bay ready for some primer! After grinding all the studs off the firewall that I will no longer need it was almost time for some primer!


Ready for primer!



Paint


now bye bye sound deadening...

primer like WHOA!!!

and that's where I'm at so far! Updates to come so check back daily!!!! Give feedback if you'd like.
Tomorrow it's time to wet sand and apply second coat of primer to bay and hatch!
-adam
Anyway bought this car back in June 08' from HT member (ekdj) Drove to New Jersey from Cincinnati and well worth every minute and dollar spent on this car! He had the motor put in prior to me buying it so props to DJ for making my life a little easier lol.Here is a picture on the drive back from NJ...


Not even on the road for 10 min and Mark aka heel_togue was already under the dash taking it apart lol

Finally back home parked it next to my BELOVED EJ8 :'( So sad to take her apart but we had our fun in the sun!!!


March 09'
It's time to take this thing apart and get some fresh VSM sprayed! First pulled the motor...



And our entertainment for the evening.... lol hahaha


Getting the bay ready for some primer! After grinding all the studs off the firewall that I will no longer need it was almost time for some primer!


Ready for primer!



Paint


now bye bye sound deadening...

primer like WHOA!!!

and that's where I'm at so far! Updates to come so check back daily!!!! Give feedback if you'd like.
Tomorrow it's time to wet sand and apply second coat of primer to bay and hatch!
-adam
Last edited by IHRTJDM; Mar 24, 2011 at 09:13 AM. Reason: Progress Pics
Thread Starter
Honda-Tech Member

Joined: Feb 2006
Posts: 634
Likes: 1
From: Cincinnati, OH, United States
More updates? lol I just posted this lastnight what do you want from me??!!? HA I'm just playin, todays plan was to get the bay wet sanded but had to do a shitload of runnin around to get my trans. fixed! Bad 3-4 sleeve
But tomorrow for sure the bay will be ready for sealer and base! 
As for plans right now:
1) Get whole car sprayed VSM again
2) Finish the wire tuck
3) Install all of my goodies
then go from there! But don't you worry I have a few tricks up my sleeve :D
But tomorrow for sure the bay will be ready for sealer and base! 
As for plans right now:
1) Get whole car sprayed VSM again
2) Finish the wire tuck
3) Install all of my goodies

then go from there! But don't you worry I have a few tricks up my sleeve :D
Thread Starter
Honda-Tech Member

Joined: Feb 2006
Posts: 634
Likes: 1
From: Cincinnati, OH, United States
mee too 
I had some but not very good! this way it will be a better before and after HA!
It's gonna be a doosey lol

It's gonna be a doosey lol
Trending Topics
Thread Starter
Honda-Tech Member

Joined: Feb 2006
Posts: 634
Likes: 1
From: Cincinnati, OH, United States

Only parts I swapped are the Recaro's and Spoon OG Mirrors. No More ROTA's!!! Eveything else is 96-98 soo....
Lets hope
adam that engine hoist looks firmilar, oh wait thats mine!! haha Oh ya remember last week when my car looked like ****? its sprayed stop by the shop sometime to check it out
Thread Starter
Honda-Tech Member

Joined: Feb 2006
Posts: 634
Likes: 1
From: Cincinnati, OH, United States
I stopped up there yesterday! **** looks amazing coming out of that "BOOTH" lol
This build sucks
Thread Starter
Honda-Tech Member

Joined: Feb 2006
Posts: 634
Likes: 1
From: Cincinnati, OH, United States


