so if my jdm itr cluster doesnt lite up...that means theres no bulb or wat???

 

So my friend has an JDM ITR Gauge Cluster in his LS and I wanna snag it from him since his car is done. But anyways, he said the miles never started to add up, or like it stopped. Do you know what might be the problem?

 

 

So If I have a 94 guage plugs they will work with a JDM ITR cluster? Will I need to do this swap to get this to work? I want to get this taken care of since I am swapping this dash into my civic hatch.

 

The plugs will physically fit, but the wire pin locations might be off. In this case, follow these wiring diagrams.

https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/94-97-98-01-integra-cluster-into-92-95-96-00-civic-wiring-diagrams-1053318/

 

so you need two gauge clusters to make this work?

 

Not necessarily. Two gauge clusters (your original and the one you will put in) allows your new cluster to work flawlessly.

 

so im planning to get a 2001 ukdm type r cluster and i have a 2001 gsr will it work okay if i do this and the fuel and everything else will work okay??

 

I have a 97 RS. and I just got a 98+ JDM cluster. Will this work if I just follow your directions, or will I have to re-pin any wires in the harness like the 94 or 95.

 

Follow the directions and you won't need to repin the wires.

 

thanks dude. this is very imformative. im glad I ran into this post. and someone took the time to explain it to us.

 

I have a 2001 jdm type r cluster but the bulbs are burned out, will my bulbs in my 98 cluster fit and will they be the same colour.. Im pretty sure they will but want to make sure

 

They will fit and work. Light will be amber due to the gauge face of the ITR cluster.

 

im having problems with the tach not going past 50 mph. any ideas? just installed n havent done the swap yet with my ls cluster...

 

ok....did the complete gauge swap from the itr cluster into the ls cluster i had, everything works fine like my fuel gauge works now that wasnt before but i still have the tach not going past 50 mph. is my guage broken? or is it circuit board, circuits, wiring or something of that nature?

 

thanks for this link BlueIntegraBoy now it dosnt matter I will just find one now and pick up.

 

followed steps for UKDM ITR cluster into 2000 GSR and no luck

 

im also trying to get my gas gauge working i have a 96 gsr and a ukdm itr cluster can anyone hlep guide me?

 

So do you have to do this if you swap in a USDM ITR cluster into a USDM GSR? I wouldn't think so but I don't know. What about a 98 USDM ITR cluster into a 99 GSR?

 

98 ITR cluster into 99 GSR wouldn't need any modification.

 

great write up!

i've got a 98+ ITR going into a '95 GSR, will it need re-pinning?

much appreciated

 

I've never swapped any of my clusters before.. now if you put km/h faces on a usdm cluster will the meter still move the needle as if it had mph faces.. u kno what I mean? Will it read your speed in km's properly.. regardless I'm still gonna doit hahaa good lookin though

 

Well im a idiot lol.. but i followed your steps.. put in a 94 ls cluster an it works perfect... Thanks alot!

 

nice!

 

great wright up!!!!!!!!!!!!!!!