Im selling my AP1 gauge cluster out of my crx because i decided not to put a swap in it. So i wont be needing a 9k redline. This cluster was FULLY fuctional in my car. The cluster has 44k on it and it comes already pinned and has everywire labeled already. I have the modifry coolant conversion sensor as well which is needed for the temp gauge to work. Im keeping my speedoheeler conversion harness for my AP2 cluster so it's not forsale.

Heres what you need for the speedo to work and where to get it.

Speedohealer V4 with universal harness. Cost is
$109.95 at http://www.procycle.us/main/speedo_healer.htm

And heres a pic of the cluster...




Price is 300 firm or 260 and a stock EF cluster

 

bump

 

those harnesses are for motorcycles aren't they?

 

yeah but you use them on our cars

 

nice

 

bump

 

so all I would have to do is buy the harness and use it to plug the cluster into the factory plugs in my integra?

 

good question b/c im wonderiny also

 

no you would have to cut off your factory plugs and wire the ap1's up.

 

so where would the harness fall in place? In between the cluster and the new plugs that are wired to the car?

 

yes, basically here is the write up for it into my crx. Basically you would follow the same procedure but use the wiring diagram for your vehicle instead. This write up is for a ap2 cluster which has maybe 5 wires in different places however my wires on mine are labeled so the buyer will know what goes where after they get the pin outs of there cluster plugs. The conversion is pretty easy i done mine with no problems whatsoever.

https://honda-tech.com/forums/honda-crx-ef-civic-1988-1991-3/crx-s2000-ap2-cluster-write-up-info-2322849/

 

bump

 

will do 280 shipped

 

bump need this gone

 

bump

 

Bump for m0re flakes!!!

 

ttt

 

bump id like to sell this to pay a no insurance ticket instead of using my check

 

bump

 

bump