Hey guys. I've been making bars for the folks over at G2IC and I made a pretty big batch so I figured I'd try over here.

What I have:

20+ c-pillar bars. These go between the rear seatbelt guides on the c-pillars. Fits 3 dr 90-93 integras only. Made out of mild steel and powdercoated black. 1" OD tubing and 1/4" thick mounts. Fits with no mods to your car (except ditching the rubber that goes around the guides). $72 shipped







20+ rear lower tie bars. This is a solid bar with no links or anything. Mounts are 1/8" steel with 1/8" gussets, tube is 1" OD. These are also mild steel with black powdercoating. They fit all DA's and EF's. $65 shipped.





Then I have ~6 strong bars. This are a bar that spans the bumper mounting points on the inside of the trunk. People were modifying their cars (and the bars) to make stock ITR strong bars fit their DA's so I made these. They are mild steel with 1/8" mounts powdercoated black. Fits DA's with no mods and will fit EF's but I will be making a straight channel aluminum strong bar that has no welds for EF's. It will be stronger lighter and cheaper. DA strong bars are $40 shipped.





The prices are shipped priority in the US, Canada, Hawaii and Alaska will be a little more. I accept (and prefer) PayPal but a MO is ok. If you dont trust me I can send COD for an extra $5. If you want references you can ask the guys over at G2IC what they think about me or the bars, I think everyone who bought one (or more) has been very happy.

Ogle6@hotmail.com

Also if you want one of these for a different app i have access to an EG 4dr, hatch, and del sol, an EF 4 dr, EF CRX, DC 3 dr, 93 escort GT, and a BB prelude. Let me know.

Thanks guys,

Ben



[Modified by Ben Ogle, 4:44 PM 10/3/2002]

 

u sell anything that fits a 01 GSR?

 

I can vouch for mr. ben ogle and his bars. I have almost all of them and it really made a noticeable difference in my 92 LS.

Good job ben.

 

yea i be interested in one for the civic hatch......leeme know when you make some and what the prices are. Pictures will also be nice.

thanks.

 

I'd be interested in a B pillar or C pillar bar to run my harnesses to along with the being a chassis stiffener.

 

dope!! I gotta find some ca$h and get some of these! fReeBump

 

 

It doesnt replace the bumper support. It bolts on to the studs (from the support) on the inside of the trunk. You *could* butcher your rear support (I made mine on my EF 2 seperate mounts). But you assume all responsibility if you do this.

Thanks for the compliments guys. I have to finish a little batch of front lower ties for EF/DA then I will move on to DC, then EG. I dont have any way of getting ahold of an EK so that will be last.

It's funny that people always want what i dont have. Oh well. If you have an EF or a DA, the Rear lower ties are awesome.

Ben

 

I'll take one of those aluminum coat hangers for an EF when you get em ready...

 

I emailed you about using my EK for measurements

 

Back at cha.

Ben

 

bump. This board moves fast.

Ben

 

Oo.. make some DC bars..

 

Have you tried the c-pillar bars on a CRX? If they fit I'd be interested.

-Nick

 

how much cheaper if ya don't have to ship
<<<<<<<<<<<<&l t;<<<<<<<<<<<spok ane as well....and is any of th ef 4dr stuff ready.......

 

tell me when you make the strong bar for the EF the aluminum ones... i'll buy that.. and the guy asking about the c pillar bars for the crx can i ask you where the c pillar is on a crx because i can't find one on mine

 

Thats what I was thinking. They go on the rear seatbelt guides, CRX's dont have rear seats. Maybe one would fit on the front seatbelt guides but it might interfere with the seats.

Ben

 

I have two of Ben's Bars

Rear Lower Tie and the Trunk Strong bar

He is great to deal with and shipping was fast...