So I sold most everything off my integra recently and got busy and didn't get back to a few people on these parts.

I'll put them up for sale again and if those people are still interested just contact me.

Original thread..

http://www.team-integra.net/forum/di...TopicID=231864


[SIZE=2]Comptech SS TIG Welded 4-2-1 Header[/FONT]





Yes, it's dirty...


Wish I could TIG weld this good.


No dents or any scrapes. I was lowered on H&R Sports and never had a problem.

How this header setup compared on the dyno:
Great Header Test

$300

---------------------------


[SIZE=2]Comptech SS Catback Exhaust[/FONT]

I may be baised but this is one of the best sounding exhausts out there for the integra. The exhaust is in great condition, with only a few small scrapes on the resonator. Lowered on H&R sports and only scraped a few times on some of the ridiculous speedbumps.

Check youtube if you wanted to hear some sound clips. I never did take any of my car.

Here is the exhaust installed:









$350

AIM: ruskerxtc (I'm online most of the day at work)

 

bump for a good seller

 

for gsr only....right?

 

What size is that exhaust?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by waddy41 &raquo;</TD></TR><TR><TD CLASS="quote">for gsr only....right?</TD></TR></TABLE>

Well it came off of a 00 GSR. What year/model is your car?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ghettocrxsi &raquo;</TD></TR><TR><TD CLASS="quote">What size is that exhaust?</TD></TR></TABLE>

It's 2.25 iirc.

 

Trade you some JDM ITR headers for the comptech headers?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Agent_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">Trade you some JDM ITR headers for the comptech headers? </TD></TR></TABLE>

Sold the GSR.

The ITR was my second choice but from what I've read the comptech header retains or even gains tq down low.

 

is the header 2.25?

 

I believe the header itself is 2.25, but the collector is a little smaller to retain low end tq.

 

Would like that exhaust but feels criminal to cut it up to fit my DB7 bump for ya anyway

 

header doesn't fit a 99 down gsr right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ForceFed Motorsports &raquo;</TD></TR><TR><TD CLASS="quote">Would like that exhaust but feels criminal to cut it up to fit my DB7 bump for ya anyway </TD></TR></TABLE>

How different are the DB7 and DC2 exhausts?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by efvader &raquo;</TD></TR><TR><TD CLASS="quote">header doesn't fit a 99 down gsr right?</TD></TR></TABLE>

As long as you had all parts from the 00-01 GSR it will fit fine. Just buy the header/exhaust and testpipe/cat for an 00-01 and your set.

 

Id have to cut the axle back and extend it so that muffler actually reached the bumper and probably extend the midpipe as well

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ForceFed Motorsports &raquo;</TD></TR><TR><TD CLASS="quote">Id have to cut the axle back and extend it so that muffler actually reached the bumper and probably extend the midpipe as well </TD></TR></TABLE>

Not a huge job but damn. Did they ever make this exhaust for the DB7?

 

Still available

 

replied to pm's

 

still available

 

my friend needs these. ill let em kno and ill get back to u

 

sounds good.

 

IM'ed

 

SOLD!!

Thanks guys