Hey all. I've done some research online and threw forums as best as I could and came up with nothing so I'm here to ask and pick some brains. I am wondering if anyone has done or has knowledge on how to do the rear rail light sequential turn signals like the new mustang's have. I have a 99 civic coupe all lights are LED and the turn signals are red instead of amber bulbs. I would like to go from one turn signal per side to essentially 3 utilizing the 2 park/brake lights per side as turn signals as well as keeping original function. I ordered a 3 step sequential kit off Amazon
https://www.amazon.com/dp/B079K6GHWM/ref=cm_sw_r_em_apa_aeNnBbE9Q537Q
So I'm wondering if:

1, it can be done at all?

2, the 2 upper brake lights on the tail light can be used for turn signals and still be used for park lights and brake lights?

3, I need to change the other bulbs?

4, i need any other products to achieve this?

5, finally any other knowledge or know how on this subject?

thanks in advanced! Here's a pic of my cars rear end

 

They're all over ebay and amazon. Here's an example:

 

I am building similar things as you wanted, hopefully, you can do a similar mod as I am.

I am building sequential turn signals 14 channels and brake mod on my Ridgeline.

I will post something when I get something done.



1, it can be done at all? Yes of course.

2, the 2 upper brake lights on the tail light can be used for turn signals and still be used for park lights and brake lights? Possible IMO

3, I need to change the other bulbs? 12V needed only. the power from car.

4, i need any other products to achieve this? Very easy

5, finally any other knowledge or know how on this subject? Nothing much



[/QUOTE]