Hey guys, I tried searching but couldn't come up with the answer I'm looking for, and asked in the ITR forum but nobody replied. I recently upgraded to OEM HID's for my JDM front end integra. I have tried to adjust them but I can't access the screw that is closest to the fender. To my knowledge there are 3 screw, one that is closest to the middle of the car that for me adjusted the height of the fog light, the one in the middle that adjusted the height of the low beams, but the one that is furthest out I can't access. Does anyone know how to get to it? I have the JDM rad support that has the hole in it right above the screw so I can see where it is, but I have no idea how to access it. Any help would be great. Thanks.

 

 

So I just wiggle those in there as best I can and try to adjust them. Does anyone know what effect that screw will have on the lights??

 

probably it's a rotational adjustment
one should be for vertical
one should be for horizontal

 

awesome, I hope so.

Thanks

 

if they're oem settings then all you would really have to adjust is the lowbeams right unless someone play around with them. there really no need to adjust anything else.

 

wrong. You need to adjust them regardless if they are new or not

 

really because i've worked on a few oem hid conversions and the only thing that really needs to be aim is the level. rotational is usually fine. i guess it's not all then.

 

acura's and lexus sometimes lack the rotational adjustment feature but jdm headlights have it.