I'm new to the forum, and a complete noob... so let's begin. I have a eg6 with a ls vtec swap.. bought with the swap. He gave me a p28 chipped ecu and a p75 ecu. Currently the p75 is plugged in because it actually runs with it,but it's running rich. When I plug in my p28 ecu, check engine light comes on and won't rev pass 4K rpm.. I've tried to check the codes by keeping a eye on the flashing lights but I doesn't seems to flash when I put a safety pin in the side connector. So I don't know what code I have.. also the p28 ecu doesn't run rich. I opened up the p28 and notice the ping on the chip is bent and one is broken off.. any help would be appreciated

 

85 views and not oneven person response. Hmm thanks