Honda-Tech - Honda Forum Discussion - issue with water temp gauge after swap

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)

- Hybrid / Engine Swaps (https://honda-tech.com/forums/hybrid-engine-swaps-18/)

- - issue with water temp gauge after swap (https://honda-tech.com/forums/hybrid-engine-swaps-18/issue-water-temp-gauge-after-swap-2317923/)

danno33

06-08-2008 11:11 AM

issue with water temp gauge after swap

Well i already kinda had an issue with my water temp gauge not working and staying in the cold area all the time....this was with the stock motor...Now i got my b16 swap and the water temp gauge responds but is now always in the red zone and stays there....So where is my issue, the gauge obviously works and responds but, is there a problem maybe with the sensor? what else could it be?

thanks guys

Mikey3000

06-09-2008 03:56 PM

Re: issue with water temp gauge after swap (danno33)

try a new one and see what happens.

All times are GMT -8. The time now is 05:56 PM.