Hey,

I just got a new harness for my passenger side bumper lights/head lights well it didn't fit into the plug under the passenger dash so I snipped the passenger corner bumper light plug and wired it. Well now when I plug in my battery it'll cut on automatically and can't be switched on nor off. I know I wired it right. What could be the problem?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GraphiteMW &raquo;</TD></TR><TR><TD CLASS="quote">Hey,

Well now when I plug in my battery it'll cut on automatically and can't be switched on nor off. I know I wired it right. What could be the problem?</TD></TR></TABLE>

The problem is you didn't wire it right.

 

Ill take pictures tommorrow, I just every single wire variation on the 4 available spliced wires and none of them work.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Perfectionist &raquo;</TD></TR><TR><TD CLASS="quote">

The problem is you didn't wire it right.</TD></TR></TABLE>

LOL

bahhahaa

the truth hurts lol.....there is certainly a problem with your wiring bud. Go back through and check again.

 

Funny funny




Thats how I had it wired, no its not ghetto spliced in the picture there just overlapped to show that I did wire the colors right but no matter what it still stays on right when I plug in the battery and won't go off nor signal correctly. Suggestions?