Just finished putting engine back together after blowing timing belt at over 6000 RPM. It's pretty much all done have ran it runs beautifully we just can't figure out where this connecter goes.

Any suggestions, it comes from just under the Intake somewhere on the passenger side and is a short wire, about 6-7 inches.

Thanks

 

It's usually good to know the wire colors...

 

In the second picture it is the wire right in the center of the picture black color with grey connector?

 

I mean the wire colors going into the back of the plug so we can look it up in the manual. Like red w/white stripe on left, blue w/green stripe on right, etc....

 

It appears to be a red colored wire and a black one.

 

what kinda car is this?

 

It is on a 98 Honda Prelude SH. Thanks for the help i figured it out. Took the car out today running great.

 

It plugged in to one of the emission canisters that bolts right under the Intake.