Hey guys, I was hoping that someone would be able to recommend what header is best for my H23...there's a leak in my down pipe, so it gives me a reason to replace the crappy stock header.

Any ideas?

 

dc header

 

DC

 

i'd look on e-bay or the classifieds for a used dc header

 

DC sports is about the only one, cept ractive crap

 

I've actually been thinking about trying a set of Holley Airmass headers. They are designed and built by Flowtech. My DC headers were of very crappy quality. I was very dissapointed in these headers.

 

Cool...I don't know much about Holley other than their intake systems and headers for american cars. Were your headers on an H22A or H23?

 

hey GunLude... Just in response to the airmass header, its the same manufacturer as DC so the design will be the exact same.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96SR-V &raquo;</TD></TR><TR><TD CLASS="quote">hey GunLude... Just in response to the airmass header, its the same manufacturer as DC so the design will be the exact same. </TD></TR></TABLE>

i knew it...

 

How many people would be interested in a custom header?

 

i would. same $ as the h22?

 

If Crower releases their cams for our cars, I am in 100%

 

How is it that i live in fredericksburg but never hear a word about you, not even at the LOT. I wish i could afford your exhausts, but sadly best buy doesnt pay me THAT good.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SMSP &raquo;</TD></TR><TR><TD CLASS="quote">How many people would be interested in a custom header? </TD></TR></TABLE>

For how much?? 1K

LOL

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by preluda92 &raquo;</TD></TR><TR><TD CLASS="quote">If Crower releases their cams for our cars, I am in 100%</TD></TR></TABLE>

they are goin to release them in two weeks. i called crower already.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SMSP &raquo;</TD></TR><TR><TD CLASS="quote">How many people would be interested in a custom header? </TD></TR></TABLE>

omg: this could be the beginning of an all motor h23 trend
or at least a bad *** header for juiced h23's

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SMSP &raquo;</TD></TR><TR><TD CLASS="quote">How many people would be interested in a custom header? </TD></TR></TABLE>
count me in, in a few months

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SMSP &raquo;</TD></TR><TR><TD CLASS="quote">How many people would be interested in a custom header? </TD></TR></TABLE>

Im in for it

 

The cams are done.

$400 for both cams
$333 for springs and retainers

you guys are slow

Stage 1= 12hp gain, stock spirngs ok
Stage 2= 12-18 hp gain, need springs and retainers
Stage 3= 18+ hp gain, rough idle

 

I'd definitely be interested. Price? I'm assuming you'll ship to Canada?

 

over on Prelude Online (only the best site availible) the cams have been availible since 12-9-2003 and were on display last november at some car show with other crower cams.

as far as the smsp header, i assure you that many h23 (and jdm f22b) guys would buy it. however if it is ~$1k, they would not unless their motor was built because you can get a jdmh22 for a few hundred more.

"Someone that's a member over there should tell him to come on PO so all of us can discuss this with him. I think there'd be a high demand, as long as it wasn't too butt-raping expensive." -Josh aka Preyluder

 

No header for the H23/2 is worth 1K

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sockswam &raquo;</TD></TR><TR><TD CLASS="quote">The cams are done.

$400 for both cams
$333 for springs and retainers

you guys are slow

Stage 1= 12hp gain, stock spirngs ok
Stage 2= 12-18 hp gain, need springs and retainers
Stage 3= 18+ hp gain, rough idle
</TD></TR></TABLE>

whoa, when did that happen? i haven't heard anything about this and they're not on crower's website so where do you order them from? btw....are they regrinds?

thanks,
David

 

not sure but i hear you can get them from an individual if you know the right one

or if you have da hookup

 

hmm...anybody else know about these cams or who to get them from? i'd be interested and im sure many of us other h23ers would be

thanks,
David