Porsche 944 Center Console in My EX.
I got a job in a quasi-junkyard... I saw the center console and wanted it... It went in SOOOO easy I can't believe it... I still have some finalization to do but overall I can't believe how simple it was...
The craziest part is that it mounts PERFECTLY (well just about) in 2 different possitions... SO... you can mount it lower and a little further back than I did and you DO NOT loose the pocket/stock ashtry/cig. lighter. and the joint where the stock honda bit and the porsche front bit meet lines ABSOLUTELY PERFECTLY. there is NO gap when mounted lower... but I don't think the lower din hole would be deep enough for a full size headunit etc... but it would fit a half depth cup/pocket. I'll take pics of it mounted the other way before I finalize the installation... Just wanted to put pics up cuz I've had a boner over this for 2-3 days now and my wife just doesn't care. (it's actually the first thing I've done to my car that she A. noticed and B. Liked.) here are the pics... **EDIT 2** Did some more work to get it all in properly... still have some things to do but IMO it looks MUCH better now that the headunit sits in it and the lower pocket is one that's meant to be there... NEW PICS... http://we-todd-did-racing.com/wetodd...ZmQzMXk1NDE%3D Yes it's still dirty... and the bottom still needs to be covered (where it meets (or doesn't meet) the floor), I'm also going to cut/reposition the shifter so the knob sits more appropriately... That's it for now... I may clean it today and take better pics in better light. **/EDIT2** From Backseat... http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D The merge of the porsche front bit and the civic rear (will be changing to a 4door armrest rear section and filling that gap with something soon)... http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D From the side (I will be cutting a piece of thin wood and carpeting it to fill in the gap between the bottom of the center console and the floor of the car)... http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D *edit* This is not the same picture... So you can't see the gap between the floor and the console... */edit* I'll edit the post with a write up if anyone is interested... But like I said it's not quite done yet... still have to finish up some details. Let me know what you think... And yes be honest... Flame-tards welcome. Modified by NonovUrbizniz at 4:15 PM 11/8/2003 Modified by NonovUrbizniz at 4:20 PM 11/8/2003 Modified by NonovUrbizniz at 5:42 PM 2/14/2004 |
Re: Porsche 944 Center Console in My EX. (NonovUrbizniz)
That's crazy, man. Now you have a Porsche part on your car. https://honda-tech.com/forums/images...s/emsmilep.gif
|
Re: Porsche 944 Center Console in My EX. (mycivicstoo(s)low)
Nice find, nice work, and you get a https://honda-tech.com/forums/images/smilies/emthup.gif for originality.
|
Re: Porsche 944 Center Console in My EX. (NonovUrbizniz)
Thats kick ass. What year 944?
|
Re: Porsche 944 Center Console in My EX. (Caveman74)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Caveman74 »</TD></TR><TR><TD CLASS="quote">Thats kick ass. What year 944?
</TD></TR></TABLE> 85.5+ for sure... they may have come in earlier ones though... Oh... I forgot to mention the shifter is literally as close as it could be... it's it's in first or third gear in the pic... I'd also like it to sit lower so it (the shift knob) looks more like it does in the 944... I'm thinking of cutting/grooving the bottom of my B&M shifter and bolting on the top half of the 944 shiftlever so A. the shiftknob seats perfectly (it's on tighter and better than the old Junkyard knob I had on there) B. I can have it sit further forward so it doesn't strecth the leather as far as it does now in the bottom gears. This has also started what could turn out to be a pretty good theme... as gay as that sounds... You see... 944 turbo's also came with water/oil cooled turbo's and EXTERNAL wastegates... not to mention a HUGE (well not compared to aftermarket ones) intercooler... So... In the not too distant (well probobly pretty distant) future I may be slapping some more important porsche parts on my car... |
Re: Porsche 944 Center Console in My EX. (NonovUrbizniz)
bump cuz I'm still all giddy about it.
|
looks good man, nice work
|
Re: (EGCoupe)
ahaha i thought you meant you put the whole dash in there not just some small lower piece.
props tho on originality https://honda-tech.com/forums/images/smilies/emthup.gif |
Re: (chrysler kid)
Nice ingenuity. https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: (Ef Whore)
Looks good. Yeah I got a Chevy bench in the back of my civic.... fits like a glove. https://honda-tech.com/forums/images...s/emsmilep.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif
j/k |
thats nice
|
Glad to see some creativity being put to good use. Post some more detailed pictures when you finalize the install.
|
That's sweet.. Good work.. You need to find some more and start selling them...
|
Re: Porsche 944 Center Console in My EX. (NonovUrbizniz)
|
Re: Porsche 944 Center Console in My EX. (hoya_10fintec)
|
Re: Porsche 944 Center Console in My EX. (hoya_10fintec)
that is cool as hell! i love it. https://honda-tech.com/forums/images/smilies/emthup.gif my friend has a 87 944 turbo, nice car, very fast, but its a lemon - he's put so much money into it and it is still a pos.
|
Re: (Ef Whore)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ef Whore »</TD></TR><TR><TD CLASS="quote">Nice ingenuity. https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>
https://honda-tech.com/forums/images/smilies/emthup.gif looks good |
Re: (Ef Whore)
|
Re: (binkster)
|
Re: (whoDAT)
original
but why? |
Re: (SikCivic)
any better pics. those are hard to see
|
Re: (98civichtchback)
that thing is nice
|
Re: (Night_Ryder)
|
Re: (blackhatchy)
how the hell did you get the idea to do this?
i cant really tell from the pic, but your car is an eg right? do you think this would be any different for an ek? when you get it all done, more pics, and a detailed writeup would be awesome https://honda-tech.com/forums/images/smilies/embeer.gif . i think i might do this to mine. https://honda-tech.com/forums/images...es/emsmile.gif |
Re: (98civichtchback)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98civichtchback »</TD></TR><TR><TD CLASS="quote">any better pics. those are hard to see</TD></TR></TABLE>
|
All times are GMT -8. The time now is 11:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands