d16z6 cam and valvetrain upgrade. give me your opinon
so i am planning on puttting a cam in my d16z6. i am on a budget of about 5 or 600 dollars. tell me what you think of this setup.
-delta regrind cam something like a stage 2 cam or a little wilder. -supertech valve springs and retainers. -VISION Motorworks Adjustable Cam Gear & Gates Racing Timing Belt http://cgi.ebay.com/ebaymotors/92-95...item3a5573287c this is the link to the cam gear. never heard of the brand but looks good and nice price. my car now has a header greddy sp2 whale penis intake apexi safc 2 aem fpr anything else i should upgrade? thanks |
Re: d16z6 cam and valvetrain upgrade. give me your opinon
Look up reviews for Vision Motorworks. You'd be better off spending the money for parts from a well known company. I've seen a well known company's cam gear that wouldn't hold still once tightened, so I definitely wouldn't trust some generic cheap cam gear.
|
Re: d16z6 cam and valvetrain upgrade. give me your opinon
Personally, going all motor with a D is just a bad idea. If you have that much already, just save a little bit more and piece together a turbo kit. If you're dead set on all motor, I'd say scratch the vision gear (I've bought vision control arms and other stuff like that and it's poor quality) and get a used AEM gear. Also, don't forget a tune. Just throwing all that stuff at a D won't get you much without a tune.
|
Re: d16z6 cam and valvetrain upgrade. give me your opinon
I would go with a skunk2 (6 bolt design gear), or something like a Bisimoto if you have the money. I have no experience with an aftermarket timing belt. OE is fine IMO.
EDIT: AEM is fine, too. +1 to the tune. |
Re: d16z6 cam and valvetrain upgrade. give me your opinon
thanks for your insight guys. probs gonna ditch the cam gear and get a brand name one. any one got one for sale?
|
All times are GMT -8. The time now is 03:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands