Yea, that's true. If someone is going to pay 1500 + for a set of 10 year old mugens they figure they can sell their brand new ones for just as much.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteSlipsWithStickers &raquo;</TD></TR><TR><TD CLASS="quote">I'm sure companies do it to keep their wheels rare, therefore making wheels they come out with later on more expensive. </TD></TR></TABLE>


Hopefully my gunmetal RSZR' s will just keep going up in value

 

I'm looking for a JDM SiR front lip. You folks know where to get one?

If I'm not mistaken, it looks like this one here.

 

https://www.hondapartsdeals.co...B++46

It is part number 71110-SR3-000

5th one down on the list.




Modified by WhiteSlipsWithStickers at 6:18 PM 10/30/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BULLRIDER &raquo;</TD></TR><TR><TD CLASS="quote">I'm looking for a JDM SiR front lip. You folks know where to get one?

If I'm not mistaken, it looks like this one here.
</TD></TR></TABLE>

ughh that car is so hot!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil_Eg &raquo;</TD></TR><TR><TD CLASS="quote">

ughh that car is so hot!! </TD></TR></TABLE>

Have you not seen it? **** is crazy, too low for me though.

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteSlipsWithStickers &raquo;</TD></TR><TR><TD CLASS="quote">

Have you not seen it? **** is crazy, too low for me though. </TD></TR></TABLE>

i seen it and its reallllll low

 

Thank you sir

 

nah i only seen it in pics, but its dunked.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteSlipsWithStickers &raquo;</TD></TR><TR><TD CLASS="quote">
Here it is installed on my car.

</TD></TR></TABLE>

car looks good man. perhaps a closer shot of the lip?

 

 

I told you BULLRIDER. There's a vendor on the boards selling it for pretty cheap. Get the hardware at Ace for $15. Honda will want almost $100 for the mounting hardware.

https://honda-tech.com/zerothread?id=1859087

List of parts for hardware:

Ace Hardware

Item # 45152 Qty:11
Item # 58458 Qty:11
Item # 88 Qty:11

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STImachine &raquo;</TD></TR><TR><TD CLASS="quote">I told you BULLRIDER. There's a vendor on the boards selling it for pretty cheap. Get the hardware at Ace for $15. Honda will want almost $100 for the mounting hardware.

https://honda-tech.com/zerothread?id=1859087

List of parts for hardware:

Ace Hardware

Item # 45152 Qty:11
Item # 58458 Qty:11
Item # 88 Qty:11 </TD></TR></TABLE>

The JDM SIR lip and the USDM SI/EX lip are the same thing. You can get the lip and hardware kit (oem honda) for $115 shipped from ICB Motorsports. I would never ever use anything other than OEM hardware to mount my lip, it's worth it to spend the extra $$ and have legit harware that is desighned to work with the bumper.

 

I had mine on there with zip ties for a while, but later on I put about 20 small screws all the way around it to keep it on there super tight. It was so tight that the lip started turning grey from being stretched around the corners so tight.

 

Made this removeable trunk floor for my hatch to replace the crappy setup they come with stock.

 

^^^That looks nice.

I'm using the crappy stock one that I covered in carpet.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SHG_EasyE &raquo;</TD></TR><TR><TD CLASS="quote">Made this removeable trunk floor for my hatch to replace the crappy setup they come with stock.

</TD></TR></TABLE>

looks awesome. got a pic of it in the car?

 

Thanks guys, i actually JUST finished it lol, im taking pictures of it installed in a bit, just have to get my lazy *** outside to the garage

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SHG_EasyE &raquo;</TD></TR><TR><TD CLASS="quote">Thanks guys, i actually JUST finished it lol, im taking pictures of it installed in a bit, just have to get my lazy *** outside to the garage </TD></TR></TABLE>

Get that lazy *** up!!!!!!!!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^Sammy &raquo;</TD></TR><TR><TD CLASS="quote">!.]

Get that lazy *** up!!!!!!!!!!! </TD></TR></TABLE>

Ha,Ha,Ha,Ha,Ha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SHG_EasyE &raquo;</TD></TR><TR><TD CLASS="quote">Made this removeable trunk floor for my hatch to replace the crappy setup they come with stock.

</TD></TR></TABLE>
mine is a piece of cardboards over a tire with carpet on top? ionno if thats how they all came but this looks really nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jxhxb &raquo;</TD></TR><TR><TD CLASS="quote">
mine is a piece of cardboards over a tire with carpet on top? ionno if thats how they all came but this looks really nice </TD></TR></TABLE>

yeah thats how they come stock, mine actually didnt even have that when i got it lol.

Pics installed

 

That is awesome work.

 

no more gutted hatch?