i just got a really good price quote IMO from these guyz wondering if i could get some vouches for em. They said $400 chipped P28 and dyno tuned with crome on my junkyard turbo set up that i am piecing together.... even nicer they said they will set me a basemap for $85 so i can get the car down there and that would be taken off of the total price. Donno but it sounds pretty good to me. Also if i get it tuned at the shop would i need to get the software on my computer right away or can i hold off till i have the extra money for ostrich, datalogging, and crome pro?

 

nobody has used these guyz?

 

really good people to work with,you wont be dissapointed

 

They're good guys; these cars below have been tuned by philly dyno.

 

cute pictures, i assume they are all stock D16's running 17's in the 1/4.

Well thats what i got out of the info posted w/ the pics atleast.

 

lol thanx got any other info on those cars, dyno numbers, tune software used, and how reliable the tune was? thanx for the input tho.... and still would like to know if i would need to get the tuning software on my computer or would i be ok with letting them tune it and then getting the software myself later on?

 

Honestly if you are that worried just hang around the shop a little and get opinions from customers. I dont really listen to HT when it comes to shops and stuff, i get opinions from people that have had their car worked on there, i look at the quality of the work they do and also base my opinion on the personalities of the workers... quality isnt always in the work, but the attitude of the shop says alot.
Not to mention a clean shop makes the difference for me as a customer

 

yeah i was hoping that someone has gone there b4.. its alittle hard for me to get time to go places school and work right now (actually going to a tech school for automotive) but ive called em a few times, they seem good just want to hear from someone who got there car tuned there and hoping to get my other questions answered as well but yeah i do agree that appearance does matter.

 

the guys there are very nice. the guy that tunes there his name is richy he drives his 400hp del sol daily well untill he got the mini. ive been there serveral times to use the dyno never to get tunned thoe. they are very friendly people. even thoe i came there with my own tunner last time to use the dyno there were shooting pointers left and right even thoe i was just renting dyno time. very good prices also. i wish more shops and shop personalites were more like them. key point i like about the place is that they are more into helping you out then getting in your pockets for unnessessary expenses. just make sure not to get lost getting there. its a bit tricky with the one way street they are on!

 

they're great people. i used to hang out there occasionally and they dyno tuned and chipped my built h22 ek tuned and chipped there no regrets no dissappointments.

for Richie, Mark, Eric, and the rest of the crew at PDW

 

They are a popular choice for DSM's as well . If you search for tuning on just about any Northeast DSM board you'll see the PDW name

 

.


Modified by boostedblkef at 12:55 AM 10/25/2008

 

If you are in the north east NRG tech is the place to go

Miller will take care of you

 

havent heard anything really bad about them, although like stated above john kerr could tune your car on neptune for cheaper than their stated price

http://www.j-k-tuning.com

 

Im from philly and I havent really heard much bout them. Get with Chris from HomeMadeTurbo.com. His website is xenocron.com he's one of the best tuners around here. Not to far from philly either.

 

yo is it true that philly dyno shutin down???

 

ive heard that too its ashame to see them go out. they are nice guys down there.

on an old setup i had. ls/vtec @ 18 psi made 445hp/315 tq on pumpgas, through a 2.5inch exhuast, tuned with crome by richie that car ran pretty strong

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaveF &raquo;</TD></TR><TR><TD CLASS="quote">ive heard that too its ashame to see them go out. they are nice guys down there.

on an old setup i had. ls/vtec @ 18 psi made 445hp/315 tq on pumpgas, through a 2.5inch exhuast, tuned with crome by richie that car ran pretty strong </TD></TR></TABLE>

yeah i am gonna call up there on weds to see whats going on see if mabey they are moven or something..
its gonna suck
cuz now all we have a aap and they wunt 650 for a tune

philly dyno is where its at..

 

i cant believe Mark hasn't chimed on here yet....

EDIT: ohhh wait, thats right, he whips a supercharged nissan now..