Rod selection Help!!!!!!!!!!!!!!!!
Thread Starter
Honda-Tech Member
Joined: Sep 2003
Posts: 436
Likes: 0
From: Dallas, TX, USA
Rod selection Help!!!!!!!!!!!!!!!!
I'm having trouble figuring out which rods to order from pauter. My set up is a sleeved b20 block bored to 83mm with a gsr crank. Anyone has any ideas PM me or leave a Post. Thanks!
New User
Joined: Mar 2001
Posts: 12,296
Likes: 0
Re: Rod selection Help!!!!!!!!!!!!!!!! (ninesecrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ninesecrx »</TD></TR><TR><TD CLASS="quote">gsr</TD></TR></TABLE>
Member
Joined: Jul 2001
Posts: 3,198
Likes: 1
From: USA
Re: Rod selection Help!!!!!!!!!!!!!!!! (Boostfed.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com »</TD></TR><TR><TD CLASS="quote">GSR</TD></TR></TABLE>
Honda-Tech Member
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Re: Rod selection Help!!!!!!!!!!!!!!!! (GoldenEagleMfg.com)
This is fun! Actually I just don't feel like studying right now... The B16B, B18A/B, B20B/Z, and B18C/1/5 all have a deck height of 270mm. That being said, if you use a GSR crank in any of the blocks I just listed, you simply use GSR length rods (that is unless you're running a custom piston, but you didn't mention that). 
Thread
Thread Starter
Forum
Replies
Last Post