The charge piping in my car is a mess and was wondering if anyone knows of a place that offers a proper charge piping kit. Preferably aluminum piping kit, polished and made to fit an EM1. Would also prefer something that doesn't have welds everywhere, just a clean mandrel bent kit.

 

Go-Autoworks.com .

 

Even they have quite a few welds. You aren't going to find a good kit that doesn't have welds. Unless you LOVE having couplings everywhere? Either way I would take a weld over a coupling any day.

 

SRE makes nice charge piping and very inexpensive. Ive been running their kit for about 6 years no issues, cost me about 100 bucks

 

This may sound horrible but im running a charge piping kit from ebay. It is a 3 peice kit. I ordered the one for a teg so the pipe drops infront of the radiator. It has 1 mandrel bent pipe that goes from t.b. to infront of the wheel then a 90* to the fmic and then one u bend on the hot side....ill see if i can find a link it was like 100-125 on ebay with no bov flang( ordered specifically since i run a blitz)

 

Scott that's the are kits I'm referring to. Cheap on eBay and very well layed out .

 

You mean these.
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

 

Thanks.
Ours will have welds as we build ours here, they arent pre fab/pre bent kits.
Weld count will depend on bend count, but the only visible welds are on the upper pipe; which for an EM1 Civic kit we wll have 3 welds on the upper pipe (2 pipe, 1 flange)

 

Co-sign

 

Yes grumble that is the kits I'm talking about

 

That kit looks great! Makes me want to swap out my inlinePRO pipes so I can run a tail bov!

 

go autoworks,SRE and peakboost makes the best charge pipes imo.


Posted from Honda-tech.com App for Android

 

Just change the BOV flange

 

They have a kit for a Tial BOV.

 

Does Go-Autoworks make a kit for Back door hot side IC only? Just needing cold side charge pipes.

 

Maybe go to the site and see? Better yet, contact them directly? Even PM the guy in post #8?

 

I had thought of that but I'm not too happy with the way the inline cold side fits to be honest. I would also like to relocate my battery in the passenger wheel well and that's right where the cold pipe currently runs.

 

Yes, all the time

 

Thanks Autoworks I will be contacting you soon.

 

yeah i couldnt find the kit anymore on ebay and i bought it dec. '10 so archive only goes back three years....sorry i couldnt help more

closest kit i could find was the sre one.

 

I ordered the go-autoworks kit for my turbo integra its fit perfect!

 

The Go-Autoworks kit is perfect...the part that bugs me about it is the 2 welds on the upper pipe.

The SRE kit is sweet, but I don't like the GSR layout in the Civic.

I just contacted Treadstone Performance, because they almost have exactly what I am looking for but the problem with their kit is, 2.5 inch piping on the hot side and I have a 2 inch inlet on my intercooler.

I know, I'm difficult but I just want it to be as clean as possible.

 

I would say get a treadstone intercooler along with the piping kit!

 

im running mine from goautoworks too. Its clean and looks awesome. No joke.

 

I have seen the treadstone kit it doesnt fit that well