OBX Top mount? Anyone ever run this or try it?
Saw this OBX Top mount for B-series. I'm looking for either top mount or ram horn. Is this some junk stuff welded together? Or has someone actually used this manifold before. For the price Is it actually worth it? Just want some input if i should get it or would it crack later....
http://cgi.ebay.com/ebaymotors/90-01...5809QQtcZphoto http://www.racingpartsdepot.com/pictures/10996-2.jpg http://www.racingpartsdepot.com/pictures/10996-6.jpg http://www.racingpartsdepot.com/pictures/10996.jpg |
Re: OBX Top mount? Anyone ever run this or try it?
I'd try it for $350, just add some supports.
|
Re: OBX Top mount? Anyone ever run this or try it?
its worth a try
|
Re: OBX Top mount? Anyone ever run this or try it?
Yeah, i thought about that. I wonder if anyone has ever ran this with no problems
|
Re: OBX Top mount? Anyone ever run this or try it?
Looks decent. Probably super thin tho. I thought MY ebay mani was pretty stout, til I compared it to My RLD ram horn I got. The Quality of the Welds/metal/collector is a NIGHT and DAY difference.
|
Re: OBX Top mount? Anyone ever run this or try it?
theres a guy that has one here, if he turned his little t3 t04e where the compressor faces the driver side headlight, HE CANT, when he faced it towards the radiator, HE CUT OFF HALF THE RADIATOR SUPPORT LITERALLY TO MAKE IT FIT!!
DONT BUY IT LOL!!! |
Re: OBX Top mount? Anyone ever run this or try it?
I have seen ramhorn, DP, and dumptubes all TOP notch stuff go for 400 on here used. Do that man
|
Re: OBX Top mount? Anyone ever run this or try it?
ok thanks for feed back guys!
|
Re: OBX Top mount? Anyone ever run this or try it?
If you wanna go low cost.. I've had good luck with the Blox cast manifolds. I made 350 on a stock GSR on pump with one and a T3/T4, and his buddy with a fully built motor same manifold and turbo combination laid down about 430HP @ 9K before it ran outta breathing room.. They are not bad, and you can get em for under $400 if you look around. Not good if your going for high power, but for a stock motor setup they are a really good deal and spool quick.
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by SPOOLINmatt
(Post 37445599)
theres a guy that has one here, if he turned his little t3 t04e where the compressor faces the rad support, HE CANT, when he faces it towards the radiator, HE CUT OFF HALF THE RADIATOR SUPPORT LITERALLY TO MAKE IT FIT!!
DONT BUY IT LOL!!! Anyhow i have a friend who is running one on a B20vtec using a .63 a/r t4 flanged GT35r and it fits fine, i cant imagine a 40r going on there though... |
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by blinx9900
(Post 37452362)
there is some confusion here for sure, that manifold only comes with a T4 flange so i fail to see how a t3/t04e would fit on it in ANY configuration.
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by Tony the Tiger
(Post 37454466)
Best post of the day..lol
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by blinx9900
(Post 37452362)
there is some confusion here for sure, that manifold only comes with a T4 flange so i fail to see how a t3/t04e would fit on it in ANY configuration.
Anyhow i have a friend who is running one on a B20vtec using a .63 a/r t4 flanged GT35r and it fits fine, i cant imagine a 40r going on there though... here is one...you CANT put the turbo on the other way or you would just have to chop a different section out. OBX TOP MOUNT. http://i99.photobucket.com/albums/l3...20816311-1.jpg |
Re: OBX Top mount? Anyone ever run this or try it?
Holy Sh-t!!
|
Re: OBX Top mount? Anyone ever run this or try it?
Wow.. HELLA ghetto. This manifold is a disaster waiting to happen..
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by SPOOLINmatt
(Post 37455775)
well my ****ing bad i didnt pay enough attention to the garbage to realize what size flange was on it. It is that manifold.
here is one...you CANT put the turbo on the other way or you would just have to chop a different section out. OBX TOP MOUNT. http://i99.photobucket.com/albums/l3...20816311-1.jpg |
Re: OBX Top mount? Anyone ever run this or try it?
Beteer pic of the manifold on a car pls
|
Re: OBX Top mount? Anyone ever run this or try it?
I was thinking buying OBX manifold but when my 3rd OBX turbo went out, I said I'll pay more but I'm not buying it...
So I found top mount from eBay for $450 shipped with t3 flange 38mm Wastegate flange and it fits perfect. You just have to wait a little and look more, there is good used top mounts up there. No more OBX parts for me..! I know there is some used top mount for cheep at www.homemadeturbo.com |
Re: OBX Top mount? Anyone ever run this or try it?
my buddy ran one for a while.fitment was not an issue at all, nothing like that pic. This was in a delsol it lasted for a while but eventuallly it cracked and broke.
|
Re: OBX Top mount? Anyone ever run this or try it?
Photo Photo Photo Photo Photo Photo Photo
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by vadimkag
(Post 37458554)
I was thinking buying OBX manifold but when my 3rd OBX turbo went out, I said I'll pay more but I'm not buying it...
So I found top mount from eBay for $450 shipped with t3 flange 38mm Wastegate flange and it fits perfect. You just have to wait a little and look more, there is good used top mounts up there. No more OBX parts for me..! It may not say OBX on the box, but I can almost guarantee you the same chinese knock off company made it. |
Re: OBX Top mount? Anyone ever run this or try it?
holy turbo batman!
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by 93CX
(Post 37459601)
It may not say OBX on the box, but I can almost guarantee you the same chinese knock off company made it.
|
Re: OBX Top mount? Anyone ever run this or try it?
maybe theres a huge inconsistency in their "JIG"
ROFL!! :P just buy a BLOX manifold, much less heart ache. |
Re: OBX Top mount? Anyone ever run this or try it?
Not to mention the intercooler is about 2" off the ground on that green car. The drivers side headlight is held on with 1 of the top bolts b/c the rest is cut and bounces horribly. The radiator support is also very easy to move around as well, as you would imagine. The funny part is, he thinks it will pass tech @ Atlanta Dragway for the IFO event!
|
Re: OBX Top mount? Anyone ever run this or try it?
I have one no problem , my car is doing 424whp is a b20. 17psi
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by SPOOLINmatt
(Post 37455775)
well my ****ing bad i didnt pay enough attention to the garbage to realize what size flange was on it. It is that manifold.
here is one...you CANT put the turbo on the other way or you would just have to chop a different section out. OBX TOP MOUNT. http://i99.photobucket.com/albums/l3...20816311-1.jpg My friends T4 flanged Garrett GT35r fits on his OBX topmount with the compressor facing the driver side the way its supposed to with no issues, it actually looks and performs great!! |
Re: OBX Top mount? Anyone ever run this or try it?
im being pretty on point with the topic, that turbo is not a big turbo but still running into problems. Strange turbo or not its still a standard t4 turbo, wtf?
t3 vs t4 they are shaped the same. Still turbos This is an OBX manifold, this thread is about an OBX top mount manifold. How am i not on point with the topic. They are not consistent or they are garbage take your pick. Dont sit around and defend yourself because you happen to have one that works and others fit like crap. |
Re: OBX Top mount? Anyone ever run this or try it?
that is straight ghetto....
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by SPOOLINmatt
(Post 37461706)
im being pretty on point with the topic, that turbo is not a big turbo but still running into problems. Strange turbo or not its still a standard t4 turbo, wtf?
t3 vs t4 they are shaped the same. Still turbos This is an OBX manifold, this thread is about an OBX top mount manifold. How am i not on point with the topic. They are not consistent or they are garbage take your pick. Dont sit around and defend yourself because you happen to have one that works and others fit like crap. "well my ****ing bad i didnt pay enough attention to the garbage to realize what size flange was on it" That made it seem like your saying you didn't care enough about the topic to check what flange it was, but what ever thats not the issue. I don't have an OBX top mount so lets just get that out of the way right now. Second all t3 and t4 turbo's are NOT all shaped the same, why do you think manifold companies will say something like "this manifold only works with 4 bolt discharge and NOT 5 bolt discharge"? Different turbine housings have a HUGE effect on how the turbo sits, try and put a 4 bolt turbo on an a/c friendly cast manifold with the compressor on the passenger side and tell me how it works out. See my point here? All i'm saying is its not right to attack ANYONES manifold when we don't even know what turbo is on it. |
Re: OBX Top mount? Anyone ever run this or try it?
He was stating that the majority of the t3/t4 turbos and the t4 turbos are not that far off in size and how they sit on the manifold. I am sure the difference in a t3/t04e and a sc61 or a t67 are that much different ( 2 of the 3 come in t4 turbine housings), certainly not enough difference. The only difference in size is possibly the compressor housing depending on what trim you bought or the outer diameter of the turbine housing (which isnt going to be larger than the compressor). A lot of T4 turbos are still small frame, its obvious that he isnt comparing a small frame to a large frame like a 42R or S372. The Turblownetics T72 is the same size as an sc61 or t67, both of which are considerably "smaller" than the 72. As far as the difference in turbine housings being different, unless its an "on center" housing, there usually isnt enough of a difference between companies for there to be fitment issues. I would also imagine that the placement of the outlet on the turbine housing on a 5 bolt flange and a 4 bolt is probably the same or very close, it wouldnt make sense for one to be offset from another. I have installed a 4 bolt housing on a ac car with a tig welded log manifold made by VP fab, I do not recall any issues with the turbo or downpipe clearing the ac or the power steering on the car.
This information is just what I have gather from product that I have delt with. I have not touched anything with chinapower written on it. I cannot say anything about it other than what I have seen of a OBX top mount on the green car posted above, and I have looked @ the car in person. |
Re: OBX Top mount? Anyone ever run this or try it?
I find it amusing how honda-tech generally balks at anything obx but when this item got put up for discussion people are all out there making a big argument about it, we have seen an example in person and it isn't pretty. You might have to get the jaws of life out to make it fit or you might not. So that is a problem.
|
Re: OBX Top mount? Anyone ever run this or try it?
i think fitment is fine its just a matter of will it hold up over time.
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by blinx9900
(Post 37455266)
Whats wrong with my post?
I meant it literally.. That was a good post! Sorry if you misunderstood :) |
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by SPOOLINmatt
(Post 37465060)
I find it amusing how honda-tech generally balks at anything obx but when this item got put up for discussion people are all out there making a big argument about it, we have seen an example in person and it isn't pretty. You might have to get the jaws of life out to make it fit or you might not. So that is a problem.
Originally Posted by Tony the Tiger
(Post 37468634)
I meant it literally.. That was a good post! Sorry if you misunderstood :)
|
Re: OBX Top mount? Anyone ever run this or try it?
Any pic of this mani in a Integra dc2
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by hawkturbo
(Post 37475154)
Any pic of this mani in a Integra dc2
|
Re: OBX Top mount? Anyone ever run this or try it?
Bump
|
Re: OBX Top mount? Anyone ever run this or try it?
Originally Posted by hawkturbo
(Post 37475154)
Any pic of this mani in a Integra dc2
|
Re: OBX Top mount? Anyone ever run this or try it?
bump for pics in a ek
|
All times are GMT -8. The time now is 05:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands