Honda-Tech - Honda Forum Discussion - My car is done... atleast for now. *56k warning

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)

- Forced Induction (https://honda-tech.com/forums/forced-induction-16/)

- - My car is done... atleast for now. *56k warning (https://honda-tech.com/forums/forced-induction-16/my-car-done-atleast-now-%2A56k-warning-1134002/)

My car is done... atleast for now. *56k warning

Well, after waiting for ever to get everything shipped & resolve the bugs & issues that come with creating a custom setup. It is done (for now :-) )

Stock JDM GSR 10.6:1 c/r
JDM GSR tranny w/ LSD.
Clutchmasters Stg5 clutch & ITR Flywheel.
Skunk2 intake manifold.
Custom log manifold/dp/dt.
Garett t3/to4e .57 trim stg3 wheel 63a/r housing.
Tial 38mm .6 bar wastegate.
Greddy Type-S BOV.
Precision 350whp FMIC.
Spoolin Performance/Custom intercooler piping.
RC 750cc saturated injectors.
Moroso Distributor (dig the blue cap hah)
Walbro 255 fuel pump.
B&m fpr & guage
Pulled power steering & used a tilton resivor/breather for ps fluid
Thermal R&D 3 inch exhaust system with a 2.5-3 inch enducer & flex pipe.
AEM Uego Wideband Unit.
DEFI Boost Guage.
Self Tuned on CromePro.

http://phearable.net/turbodynochart.gif
http://www.phearable.net/album/album...001/turbo2.png
http://www.phearable.net/album/album...0001/turbo.png
http://www.phearable.net/album/album...bofrontcar.png
http://www.phearable.net/album/album...ofrontcar2.png
http://www.phearable.net/album/album.../turbocar1.png
http://www.phearable.net/album/album.../turbocar2.png
http://www.phearable.net/album/album...oenginebay.png
http://www.phearable.net/album/album...rboexhaust.png
http://www.phearable.net/album/album...rbocluster.png
http://www.phearable.net/album/album...urbolaptop.png

Big thanks to:
Darin - TitanMotorSports
Jeff Evans - boosted hybrid
Spoolinperformance for rushing the charge piping.
James at GSC for putting up with me.
Marty at inducted performance
Rickey at wiredspeedlabs.
Flamenco-T at fastturbos.com
Ken at cheapturbos.com
the list goes on.... https://honda-tech.com/forums/images/smilies/emthup.gif

Modified by mtber at 12:42 AM 2/1/2005

Modified by mtber at 12:43 AM 2/1/2005

Modified by mtber at 5:16 AM 2/4/2005

Very nice man. Glad to see some Crome users out there.

Gets crazy rich up top too.

nice pics... the power delivery looks nice too, nice and linear.

I street tuned it for a few hours on a new basemap & played with a few things such as cam timing, ignition timing & leaning it out etc.
My original plan was to target 11.5:1 it really didnt mind being at 11.0:1-11.5:1 so I left it a little richer due to the higher c/r :-)

https://honda-tech.com/forums/images/smilies/emthup.gif

Good deal, the power delivery looks like it would be a fun ride.

How do you like the IC piping? I was thinking about their setup myself? Installed nicely? Any problems?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">How do you like the IC piping? I was thinking about their setup myself? Installed nicely? Any problems?</TD></TR></TABLE>
I had to custom fab a jbend & the actuall pipe the runs from the u bend to the turbine outlet. This was primarely due to the fact that I rushed the shit out of the order & I didnt get a 90 deg rubber coupling till a few days later.

Overall the quality of the welds & the piping is awsome, I just highly recommend you get ready to mock, then paint as I did.

Looks good! The intercooler looks a bit small. What size is it? What are your future plans?

Nevermind on the intercooler. I just read it's a precision 350hp.

Re: (TurboChrgd_Civic)

Its a precision 350whp fmic.
Future plans are unknown, I just want to enjoy it for now.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integ22 »</TD></TR><TR><TD CLASS="quote">Nice numbers https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif
Just curious...how did u mount that precision IC? Thanks.</TD></TR></TABLE>

I custom fabbed mounting brackets using bolts & a steel bar from the depo :-) https://honda-tech.com/forums/images/smilies/emthup.gif

everything looks really good, good numbers too https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (Deluzional)

Re: My car is done... atleast for now. *56k warning (mtber)

wow . set up looks very clean. https://honda-tech.com/forums/images/smilies/emthup.gif happy boostin

Re: My car is done... atleast for now. *56k warning (project dc2)

Re: My car is done... atleast for now. *56k warning (mtber)

Re: My car is done... atleast for now. *56k warning (H-T)

Looks like a really nice street setup.

Re: My car is done... atleast for now. *56k warning (Lucky925l)

Re: My car is done... atleast for now. *56k warning (mtber)

nice numbers with crome. I've been considering switching over to crome from uberdata just to give it a try https://honda-tech.com/forums/images/smilies/emthup.gif

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 »</TD></TR><TR><TD CLASS="quote">Good deal, the power delivery looks like it would be a fun ride.</TD></TR></TABLE>

I took a ride. it was crazy. scary https://honda-tech.com/forums/images...s/emsmileo.gif

holy shit eh ALL MOTOR MAN went ot boost, good shit.

this guys car was a beast all motor, and now he has come to the darkside.

this is NCHATCH fromTR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbsponge »</TD></TR><TR><TD CLASS="quote">holy shit eh ALL MOTOR MAN went ot boost, good shit.

this guys car was a beast all motor, and now he has come to the darkside.

this is NCHATCH fromTR</TD></TR></TABLE>

https://honda-tech.com/forums/images/smilies/emthup.gif

I love that nice power curve. That turbo size seems to work extremely well. Would you mind sending me your bin? https://honda-tech.com/forums/images/smilies/emwink.gif I'm planning on tuning my own shat too and would like to reference some things.

Looks like you need to lean out a bit at the top end..