milwaukee area turbo

Thread Tools
 
Search this Thread
 
Old Mar 26, 2005 | 03:34 PM
  #1  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default milwaukee area turbo

anyone local who knows a place i can take my air research t/3 to get looked at or rebuilt i think the seals went out and my botom end siezed up
Reply
Old Mar 26, 2005 | 03:55 PM
  #2  
Group Tenacity's Avatar
Honda-Tech Member
 
Joined: Jan 2004
Posts: 1,473
Likes: 0
From: Lompoc, Ca., USA
Default Re: milwaukee area turbo (funvtec)

Hit up Beeyond Engineering, there in Milwaukee on south 38th. st.

http://www.beeyond-engineering.com/

Mike...

Reply
Old Mar 26, 2005 | 04:49 PM
  #3  
BEEYOND's Avatar
Honda-Tech Member
 
Joined: Apr 2004
Posts: 931
Likes: 0
From: Milwaukee, WI
Default Re: milwaukee area turbo (Group Tenacity)

sup Mike..... heard you hit 10.7s.. nice time!!! Our street car is doing 11.1-11.2@133-135mph@20psi... hopefully get into the 10s soon.. Will do 26psi at the next dyno tune. Race car is done... dyno that too and then get corner balance and alignment... good after that!!! Will update you bro.... so far 10.1 and 10.2s on the race car..no hookup at all!! hehe!!!

beeyond-engineering.com
grouptenacity.com
exospeed.com

all gets
Reply
Old Mar 26, 2005 | 05:10 PM
  #4  
racinskittle's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 2,802
Likes: 0
From: USA
Default Re: milwaukee area turbo (funvtec)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by funvtec &raquo;</TD></TR><TR><TD CLASS="quote">anyone local who knows a place i can take my air research t/3 to get looked at or rebuilt i think the seals went out and my botom end siezed up </TD></TR></TABLE>

if it's shot would you sell it? If not, Yeah beeyond can do that. Im from milwaukee if you need it looked at. I can't rebuild it, but i could take a look if you'd like.
Reply
Old Mar 27, 2005 | 03:48 PM
  #5  
BEEYOND's Avatar
Honda-Tech Member
 
Joined: Apr 2004
Posts: 931
Likes: 0
From: Milwaukee, WI
Default Re: milwaukee area turbo (racinskittle)

fyi: beeyond sells t3 garretts for $400.00... yes true garretts!!!!!

rebuilt it will cost about $250-$325plus shipping
Reply
Old Mar 27, 2005 | 04:07 PM
  #6  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default

Hey everyonr thnks for the replies, however i will not do business with beeyond.

I have had several problems in the past, i dont want to get into it on here.

is there anyone else?
i really do appreciate your input not just shrugging off your suggestions

TIA

i really just want to see if its ok if not i'm looking into a t70
i have BIG plans and have already gotten started buy would just like to know if its ok
Reply
Old Mar 28, 2005 | 02:10 PM
  #7  
Finest's Avatar
Honda-Tech Member
 
Joined: Feb 2000
Posts: 4,887
Likes: 0
From: Milwaukee, WI
Default Re: (funvtec)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by funvtec &raquo;</TD></TR><TR><TD CLASS="quote">Hey everyonr thnks for the replies, however i will not do business with beeyond.

I have had several problems in the past, i dont want to get into it on here.
</TD></TR></TABLE>

It would be nice to share your experience with them so that other members can make a better decision before spending their hard earned money there. Just a suggestion.

BTW, there's a turbo shop in Waukeska/Brookfield area that might be able to help you. They're a B/W distributor, but it looks like they handle all other turbos as well.

Fuel Systems

Good luck!
Reply
Old Mar 28, 2005 | 06:23 PM
  #8  
adaml2nv's Avatar
Honda-Tech Member
 
Joined: Dec 2003
Posts: 2,173
Likes: 0
From: wis, consin, U.S
Default Re: (funvtec)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by funvtec &raquo;</TD></TR><TR><TD CLASS="quote">Hey everyonr thnks for the replies, however i will not do business with beeyond.

I have had several problems in the past, i dont want to get into it on here.

</TD></TR></TABLE>


humm i don't know... but i've had alot of stuff done to my car from beeyond and they where great.
Reply
Old Mar 29, 2005 | 01:44 PM
  #9  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default

i have heard alot of people who were satisfied

ui have also heard my fair share of bad things too.

my experience was horrible, i dont want to slander them so i wont get into details

over $3,500 lost in a engine swap that threw a rod in less than 24 hours that doesn't include the turbo kit i already purchased for the car
it was a used sohc vtec engine
i had to repair many thing after the car was picked up
they used a junk yard radiator for it and my turbo sucked the fins right out of it

after i complained and threatened lawsuit the mechanics and the counter person threatened me and told me that if they ever seen me on HWY(our local cruise spot ) they would kick my *** all this in the presence of my 10 month old little girl and my girlfriend

i have too many details about my problems with Beeeyond to post them all

bit i hope whoever considers them for something keep this in mind.

and to those who had goos luck with them

i wish i was you!

mabye i can talk 1 of you to take my car there for me!
Reply
Old Mar 29, 2005 | 02:25 PM
  #10  
racinskittle's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 2,802
Likes: 0
From: USA
Default Re: (funvtec)

That's ****** crazy. I haven't heard the greatest things about their shop either.
Reply
Old Mar 29, 2005 | 02:30 PM
  #11  
V8MeatHead's Avatar
Honda-Tech Member
 
Joined: Jan 2005
Posts: 385
Likes: 0
From: Holley 4053, carb 406 stroker anal Luber, Fag
Default Re: (funvtec)


I dont like how Beeyond runs their business either. They're not consistent and they rarely tell the truth on anything.
Reply
Old Mar 29, 2005 | 03:17 PM
  #12  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default

i later found out my engine was a used 1 another customer got rid of for a swap
it had a bad bearing from the get go

also after all the problems my g/f car was broken into (a 90 toyota camry) and the inside trashed and an old panasonic cd player stolen

and my 97 hatch was stolen a few weeks after all the problems

funny thing is i just moved and they were the only ones with my new address. not even the post office had it yet

i also have no enemies i'm well respected in a local car club

if you only knew what the detective said about beeyond engineering while investigating my car

i have no proof that they were involved with any of that stuff but its kinda ironic

and the police KNOW OF BEEYOND VERY WELL

my advice don't go there if your not friends of theirs
Reply
Old Mar 29, 2005 | 03:21 PM
  #13  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default Re: (Finest)

btw not to get off track here

i have gone to Fuel systems before nice place.

i bought a few gaskets there before

they told me its usually not worth getting a turbo rebuilt because a new one is typically close to the rebuilt price
they said bring my turbo in and they'll tell me how much for a new one just haven't gotten around to it yet

any others?
Reply
Old Mar 29, 2005 | 04:48 PM
  #14  
JusT a Cx's Avatar
Honda-Tech Member
 
Joined: Jan 2004
Posts: 1,493
Likes: 0
From: las vegas, Nv
Default Re: (funvtec)

The guys in my sig built my old hatch, and it was built strong, and as you can see, was not too slow. They do work for most of the people in the Racine area as well as Milwaukee. Talk to Joel if you need the turbo checked out. I had work done at beeyond, my car left with a CEL, didnt fix it, and I never went back. Extreme took care of me, and will do the same for you. Their # is 262-637-4141. hope it helps
Reply
Old Mar 29, 2005 | 07:54 PM
  #15  
racinskittle's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 2,802
Likes: 0
From: USA
Default Re: (JusT a Cx)

I've heard good things about extreme as well. There was a kid from Mequon that swore by that place......Im a little hesitant of shops though, too damn expensive
Reply
Old Mar 30, 2005 | 04:37 PM
  #16  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default Re: (JusT a Cx)

i'll drop them a line soon prolly like 2 weeks

thanks for the info!
Reply
Old Mar 30, 2005 | 04:51 PM
  #17  
ace42004's Avatar
Honda-Tech Member
 
Joined: Jul 2004
Posts: 748
Likes: 0
From: Denver, PA
Default Re: (funvtec)

WOW...i guess its cause i know bee and them personally thats y they do good work on my car
Reply
Old Mar 31, 2005 | 01:41 PM
  #18  
funvtec's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2005
Posts: 194
Likes: 0
From: Milwaukee, WI, USA
Default Re: (ace42004)

i've heard that helps big time!
Reply
Old Mar 31, 2005 | 03:05 PM
  #19  
HiProfile's Avatar
Honda-Tech Member
 
Joined: Jan 2005
Posts: 7,015
Likes: 7
From: b00sting my D16s, SoWis, USA
Default Re: (funvtec)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by funvtec &raquo;</TD></TR><TR><TD CLASS="quote">the counter person threatened me and told me that if they ever seen me on HWY(our local cruise spot ) they would kick my *** all this in the presence of my 10 month old little girl and my girlfriend</TD></TR></TABLE>

Hell, if I ever see their cars on hwy, I'll be sure to show the love with whatever sharp metalic object I have. I hate to see the strip go down hill, but people like this deserve it. The problem with the area is that it seems that there's more retards than good people.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ek4u2nv
Northeast
4
Jan 9, 2012 11:56 AM
XXXRacing
Drag Racing
10
Apr 30, 2008 02:50 PM
superhatchbackbros
Honda CRX / EF Civic (1988 - 1991)
4
Oct 4, 2006 06:35 PM
jtracing919
Forced Induction
6
Mar 8, 2006 04:13 PM
BoostingGSR
Forced Induction
10
Aug 5, 2001 05:53 PM




All times are GMT -8. The time now is 07:44 AM.