jay's holset powered DA!!
 

whats up Honda tech...im not the newest here but I don't post too often. I just like to lurk as a lot of us do. a little about myself, my name is Jalen, i'm 19 years old, and this is my first actual build to this caliber(which probably wont be the best in a lot of your eyes a.k.a Ballers lol) but i'm going to go for it because everyone been telling me I couldn't.
BRACE YO SELF TO READ
Anyway, I've owned two integras. 2nd generations to be exact. one half b-62p and my more recent one is g-71p and only looks good from 15ft away.

old one:http://i788.photobucket.com/albums/y...psdmicndoz.jpg
http://i788.photobucket.com/albums/y...psynilh0jf.jpg

sold the shell for $50 with no motor or trans and stripped down because it had frame damage. it had your basic bolt-ons. a rare ss dc sports exhaust(for sale) and koni yellows with some sleeves.

current integra bought it with a hacked up b20 block mated to an a1 head with arp headstuds. paid way too much for it but it had a relatively clean body.

http://i788.photobucket.com/albums/y...psummlkkv9.jpg

has cheap ebay coilovers,ugly tint, had a fart can which I swapped out my dc sports exhaust for, nrg woodgrain wheel and quick release, jdm one pieces I bought, cheapo headers, nardi wooden shift knob, converted to 90-91 integra bumper cheap lip and such.
I blew the motor due to lack of oil and being stupid.

ENOUGH OF THAT NONSENSE.
Turbo stuff that I've compiled over the last 2 or 3 months. mind you, I am by no means rich just doing what I can with my budget.

-Nippon racing std cast pistons with floating wrist pins
-npr nitrate coated rings
-scat forged h-beams
-holset h1c turbo with 9cm or .63 a/r hotside with 4 bolt from timsturbos
--4an vibrant oil feed line
-ebay intercooler( 27x7x2.5")
-ebay charge pipes and couplers
-turbonetics raptor bov
-ebay cast manifold
-spa bottom mount cast manifold
- tial 38mm wastgate
-12 an drain setup with 45* from the drain flange to pan to clear the block
-super tech valve seals

I'm going to upload photos in another post because photobucket is not working on my laptop. sorry for the double post.

Re: jay's holset powered DA!!
 

Here's so more pictures of the things I have along with the process of pulling the engine from underneath the car in two hours(my second time)
WARNING PICTURE HEAVY!!!

http://i788.photobucket.com/albums/y...psyfmhswda.jpg
http://i788.photobucket.com/albums/y...psmnzwacew.jpg

http://i788.photobucket.com/albums/y...psntvqfoa4.jpg
http://i788.photobucket.com/albums/y...psottimjrs.jpg
http://i788.photobucket.com/albums/y...psdpq1izb4.jpg
http://i788.photobucket.com/albums/y...psgdzad7rn.jpg
http://i788.photobucket.com/albums/y...ps9d6runlu.jpg
http://i788.photobucket.com/albums/y...psrkzi9tvd.jpg

http://i788.photobucket.com/albums/y...psyr9bgvbd.jpg
http://i788.photobucket.com/albums/y...psczoaoikf.jpg
http://i788.photobucket.com/albums/y...psb3ypdqvl.jpg
http://i788.photobucket.com/albums/y...psntfz1hne.jpg

New setup flipped the turbo around to make the compressor side on the passenger side. Old setup and manifold first:
http://i788.photobucket.com/albums/y...pshn09kgih.jpg

http://i788.photobucket.com/albums/y...ps6vrnfdj7.jpg
http://i788.photobucket.com/albums/y...pssxe28rdu.jpg

http://i788.photobucket.com/albums/y...psthqut6rw.jpg

http://i788.photobucket.com/albums/y...psgwkgh13z.jpg

Done with pictures for now until I make some more progress. My car is two hours away from me at my girlfriend's house.

My goal for this build is to make 300whp on this setup...I'be been told that this turbo is capable over it but may need to push a higher psi due to the higher range effieciency islands for holsets since they like a lot of boost. Right now my tial wastegate has a 5 psi red spring in it but with a mbc and a different spring can attain a better psi range. I plan on having everything honed and cleaned but I was planning on running just arp headstuds and a stock valvetrain. What is your guys opinion on my setup and reaching my goal? Thanks for any input or constructive criticism.:thumbup:

Re: jay's holset powered DA!!
 

What engine management are you going to use? Turbo didn't work flipped the other way?Looks good :)

Re: jay's holset powered DA!!
 

i'm thinking about using hondata s300. but i'm still trying to figure out the necessary things I have to do before I buy it. i flipped the turbo for 2 reasons. one being that the intercooler piping i got would have needed to be cut to fit on the driver side which isn't a big deal. on the spa manifold it would place the hot side too close to the block that it would touch butt up against the oil dipstick hole and it would make running the oil feed difficult. it would have to come up in between the runners haha and i wasn't willing to do that so i just flipped it and clocked the turbo as vertically as possible. worst case scenario ill sell the spa and get something else or use that super superb quality ebay cast manifold lol

Re: jay's holset powered DA!!
 

What's up guys I haven't posted in a minute because my main build updates are posted on g2ic. But I will update a little.

I ended up finally settling down and going with a pfab tubular log. It's a nice quality piece.
Headwork has begin on the car. As of now, I have all the exhaust valves lapped and I've began cleaning up the exhaust port with a bit of blending.

After that the head will be getting sent to a machine shop for better cleaning and inspection. But for now, I'm sending it bare.

But here are some pictures,
http://i788.photobucket.com/albums/y...psnyzhoufg.jpg
http://i788.photobucket.com/albums/y...pslj1pattx.jpg

Here's some cylinder head pictures

http://i788.photobucket.com/albums/y...pslxop8f7d.jpg
http://i788.photobucket.com/albums/y...pslpsdmpjo.jpg

http://i788.photobucket.com/albums/y...ps5ts2u0d7.jpg
http://i788.photobucket.com/albums/y...pswgwf14z9.jpg
http://i788.photobucket.com/albums/y...psyseuufwv.jpg
http://i788.photobucket.com/albums/y...psvatxc7jh.jpg
http://i788.photobucket.com/albums/y...psnlxcr5mt.jpg



Also, got the big ass 12 an fitting tapped in the oil pan
http://i788.photobucket.com/albums/y...pskgs14oqf.jpg:thumbdown:

And lastly I picked up this somewhat tattered sparco rev off craigslist for $100. Win in my book. I already have sparco sidemounts for it along with the harness guides

http://i788.photobucket.com/albums/y...ps6lbxzmwg.jpg

Re: jay's holset powered DA!!
 

Nice start! My wife would kill me if I laid car parts on the carpet.

Re: jay's holset powered DA!!
 

Yeah man thankfully I'm not married haha and my girlfriend has hardwood floors unlike the apartment I stay in. But my mom's about ready to kill me haha her and my little sister always are complaining about me working on stuff in the house haha

Re: jay's holset powered DA!!
 

yessir good work, doing the same to my 92 gsr as well.

Re: jay's holset powered DA!!
 

Thanks brotha! And you're going turbo with your b17?

Re: jay's holset powered DA!!
 

yessir in the final stages of the build now and going with the silver surfer turbo!

Re: jay's holset powered DA!!
 

That's about to rip! What numbers are you trying to make?