I own a 93 Civic Ex... With a T04e Turbocharge with Greddy Piping and Intercooler... Specs on the turbo are.....57T COMPRESSOR WHEEL
.50 A/R COMPRESSOR HOUSING
I am Currently Running at 17lbs of boost with all stock Internals at 102k Miles...
I have 550cc Rc Injections... Aem Fuel Rail.... Greddy Afv2 Controller Apexi Auto Timer... Greddy Manage Support tool with The COmputer... Venom Intake Manifold...Anf a Greddy Full Catback Exhaust....I at Currently at 342whp and 291lbs of torque I am Trying to get my Dyno Slipped Scan to place on here so Bare with me so I can Prove it thanks...

 

holy **** 17lbs on a stock block...that cant be too good...nice #'s tho

 

I also Have a bbk 68mm throttle body with a spacer... Then I about about to But everything mugen or spoon for my motor it the Make the Pistons and etc.. Or Maybe go to srp Stuff....I dont know which is better...

 

I am |<--BS-->| , that close to saying BS. But I am not gonna.
Way to represent the D-Block.

 

i have seen stock D series rods and although i believe the sleeves will be able to take that much power i doubt the rods are up to the task.

have fun while it lasts

 

I will say BS.My built d16a1 at 22psi made 301 whp and 237tq.Lets see the dyno graph

 

no way no how, on a fully stock block

 

It'll probably blow within the next few times you hit 17lbs of boost. Have fun while it lasts.

 

yeah right my z6 and jdm d15b blew to pieces under 14 lbs tuned

 

Like I said I am About to Rebuild It....I dont see why Yall say its bullshit I just had it up to 17;bs of bosot and its been holding a wekk So dont be so Jealous I mean Damn... Just becasue I know how to tune a d16z6 right and know what limits it could take.... But whatever I know what I Have and I will Shut yer MOuth when i get this dyno sheet scaned...

 

Hey man, i also live in evans georgia? Do you go to evans highs chool by any chance?

 

As long as it's properly tuned the sleeves will hold. The rods prolly won't last too long though.

 

hehe i believe it, im at 18 lbs, cometic headgasket to lower c/r, and head studs, apexi turbo kit btw

 

E-N-G-L-I-S-H. Stories I wrote in 3rd grade made more sense than that.

There's no freakin way your stock rods took 340-something horsepower. Those things are twigs.

 

Man I been Running it for almost 2 week... Its still holding up I know its gunna blow soon thats why i am bout to rebuild it but i know my car holds it so i am not worried....Yall can talk whatever yall want....I know what my car does...and i am happy with it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94dxt &raquo;</TD></TR><TR><TD CLASS="quote">As long as it's properly tuned the sleeves will hold. The rods prolly won't last too long though.</TD></TR></TABLE>

Sorry was refering to the 17lbs not the hp., 342 is a bit far fetched

 

I know my rods wont hold up lol thats why its bout to get rebuilt but i know know what i wanan rebuild it with mugen parts...srp...spoon whats a better rebuild kit any idea? i got 5k to spend...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22acivicman &raquo;</TD></TR><TR><TD CLASS="quote">I dont see why Yall say its bullshit I just had it up to 17;bs of bosot and its been holding a wekk So dont be so Jealous I mean Damn... Just becasue I know how to tune a d16z6 right and know what limits it could take.... But whatever I know what I Have and I will Shut yer MOuth when i get this dyno sheet scaned...</TD></TR></TABLE>

I am all about the stock d-series motors, but I am really doubting you. This is retarded to come onto a forum talking about about making a shitload of power on a stock d-series with no proof. I don't even think I would believe you even if I did see a scan if your dyno sheet, I am going to need more proof than that. I can't even understand half of what you are saying anyways so that's one reason I don't believe you. I call BS.

 

meet me somewhere an lets race buddy i will prove it come to nopi nationals in atlanta,ga and we will race

 

calm down, everyone.
Hey Ah, http://www.raceeng.com/ has good packages, saw it is Super Street. Click on the "Sport Compact" Section. Wide Varieties; Rings to Sleeves!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22acivicman &raquo;</TD></TR><TR><TD CLASS="quote">meet me somewhere an lets race buddy i will prove it come to nopi nationals in atlanta,ga and we will race</TD></TR></TABLE>

It's comments like these that make me think your full of ****.

 

I am full of **** haha.... Come On Man... I challenged you to a race... I want to prove it...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22acivicman &raquo;</TD></TR><TR><TD CLASS="quote">I know my rods wont hold up lol thats why its bout to get rebuilt but i know know what i wanan rebuild it with mugen parts...srp...spoon whats a better rebuild kit any idea? i got 5k to spend...</TD></TR></TABLE>

id recommend a mugen oil cap, spoon resovoir covers, and a lot more research into your project before you come on here and try to BS us.

mugen, spoon? are you just dropping names ? its been awhile since those companies offered products for the D series. and even when they did they were mostly for the carbed NA cars.

Bottom line is like beerbong said. back your statements up with solid proof to begin with.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beerbongskickass &raquo;</TD></TR><TR><TD CLASS="quote">I can't even understand half of what you are saying anyways so that's one reason I don't believe you.
</TD></TR></TABLE>

LOL.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22acivicman &raquo;</TD></TR><TR><TD CLASS="quote">I am full of **** haha.... Come On Man... I challenged you to a race... I want to prove it...</TD></TR></TABLE>

You're on the other side of the United States in case you didn't realize that.

 

You come in here talking about how you know how to tune/build a car, yet you want to use Mugen/Spoon parts for an FI set-up? Yo no comprende. Also, your name is h22acivicman, and you have a d16z6...err...hmm...

I can't say either way, since I'm not there, but you should understand why everyone has a hard time believing you. Props if it's real, though!