Blitz SBC-iD Placement (Bored)

Thread Tools
 
Search this Thread
 
Old Dec 14, 2003 | 12:34 PM
  #1  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Blitz SBC-iD Placement (Bored)

I was bored today so I thought I would find a good place to put my Blitz SBC-iD. I put it almost every where I could find but I think this is the best location as I am going to be using it as a boost gauge too. Let's hope I put this to use by February!









Reply
Old Dec 14, 2003 | 01:06 PM
  #2  
Civic_95_Si's Avatar
 
Joined: Oct 2002
Posts: 216
Likes: 0
From: Louisville, Ky, USA
Default Re: Blitz SBC-iD Placement

That unit looks alot smaller then I thought it would be.
Reply
Old Dec 14, 2003 | 01:26 PM
  #3  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Re: Blitz SBC-iD Placement (Civic_95_Si)

Yeah. It was crazy the first time I saw it. It's actually bigger looking in the pictures. I was going to take more pictures of it on but I lost my damn jumper cables, lol.

Compare the two and you can see how small it really is ... I like it because I am always worried about theft here.








Reply
Old Dec 14, 2003 | 01:44 PM
  #4  
TRE_'s Avatar
Honda-Tech Member
 
Joined: Jan 2002
Posts: 9,685
Likes: 3
From: AZ
Default

damn, thats so tiny!
Reply
Old Dec 14, 2003 | 03:06 PM
  #5  
TeStUdO's Avatar
Member
 
Joined: Oct 2002
Posts: 3,279
Likes: 0
From: Secret Tweaker Pad
Default Re: (glowing_turbo)




Wow now thats all left to do is the rest of the interior
Reply
Old Dec 14, 2003 | 03:17 PM
  #6  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Re: (TeStUdO)

Bah ... I don't need no interior. Just a cluster and I am done with the inside, lol. I'm going to make a little lock box for my Hondata S200 soon though.



Reply
Old Dec 14, 2003 | 03:35 PM
  #7  
jarel's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 13,501
Likes: 0
From: Angeles Crest, so cal
Default Re: (0x64)

nice placement. Just curious, but how are you gonna mount it or keep it straight up like that?



i just layed mine against my gauge cluster
Reply
Old Dec 14, 2003 | 03:50 PM
  #8  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Re: (chyknees)

Finally someone else with this controller that doesn't use it in their Supra I will be taking it out quite a bit to avoid people trying to steal it (yes I am that worried about theft here). I'm going to put a piece of velcro on the bottom and a piece on the steering column
Reply
Old Dec 14, 2003 | 04:15 PM
  #9  
FredoSP's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 10,836
Likes: 0
From: SC61ville, Brooklyn, NY/TX, USA
Default Re: (0x64)

AWESOME!! I was thinking about buying one of these!! I have some questions:

1. How easy is it to install?

2. Does anyone have any images of this boost controller at night?

3. When you say "taking it out" is there something where you can disconnect it without it being a pain in the ***?

4. How much does these go for 300.00?

5. Why install it on an angle?

Thanks
Reply
Old Dec 14, 2003 | 04:21 PM
  #10  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Re: (FredoSP)


1) I think it's one of the easier controllers to install. The solenoid requires no fittings.

2) I don't have any.

3) Yeah. I will take pictures after I am done posting this.

4) I paid $280.00 for my controller

5) Me?

I can't wait to put this to use. Now to get you some pictures
Reply
Old Dec 14, 2003 | 04:29 PM
  #11  
FredoSP's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 10,836
Likes: 0
From: SC61ville, Brooklyn, NY/TX, USA
Default Re: (0x64)

nice I might have to ask you where you got it!

Thanks I'll check the post later on, thanks!
Reply
Old Dec 14, 2003 | 04:40 PM
  #12  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Re: (FredoSP)









Reply
Old Dec 14, 2003 | 08:50 PM
  #13  
FredoSP's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 10,836
Likes: 0
From: SC61ville, Brooklyn, NY/TX, USA
Default Re: (0x64)

awesome pics, thanks!

Bump for any night shots?
Reply
Old Dec 14, 2003 | 09:53 PM
  #14  
Green JDM-R's Avatar
Honda-Tech Member
 
Joined: May 2003
Posts: 1,504
Likes: 0
From: Orlando, FL, USA
Default Re: Blitz SBC-iD Placement (0x64)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 &raquo;</TD></TR><TR><TD CLASS="quote">Yeah. It was crazy the first time I saw it. It's actually bigger looking in the pictures. I was going to take more pictures of it on but I lost my damn jumper cables, lol.

Compare the two and you can see how small it really is ... I like it because I am always worried about theft here.


</TD></TR></TABLE>

HAHA, i use the old spice pure sport too!!
Reply
Old Dec 14, 2003 | 10:12 PM
  #15  
Kwuaymaikrup's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 2,937
Likes: 0
From: 648 at 8,500
Default Re: Blitz SBC-iD Placement (DreamType-S)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DreamType-S &raquo;</TD></TR><TR><TD CLASS="quote">

HAHA, i use the old spice pure sport too!!</TD></TR></TABLE>

Same here! Looks like alot more simple of an install then my AVCR.
Reply
Old Dec 15, 2003 | 08:33 AM
  #16  
alpha's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Default Re: Blitz SBC-iD Placement (Kwuaymaikrup)

It's cake compared to the AVCR.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
B20vCRX
Want to Buy
3
Feb 14, 2018 04:43 PM
swlabhot
Forced Induction
14
Feb 25, 2003 02:38 PM
Troy
Forced Induction
20
Nov 3, 2002 08:29 PM
Loco Honkey
Forced Induction
14
Aug 26, 2002 03:24 AM




All times are GMT -8. The time now is 11:03 AM.