anyone know about Payn for tunning??
 

I live in St. Paul MN. I have a turbo setup and I need to get my car tuned badly. Any suggestions? I am thinking about Payn in MI. Have any of you heard anything? Any help is greatly apprieciated.

Re: anyone know about Payn for tunning?? (tslag)
 

i've needed my car tuned for quite sometime, therefor i've been doing a lot of research. i'm from illinois and the closest hondata tuner for me is Payn. I looked everywhere on this board, and saw nothing but good things about Tom. From what i've heard/seen he is a great tuner. i don't care for the fact that he uses a mustang dyno, but otherwise https://honda-tech.com/forums/images/smilies/emthup.gif . as soon as i get my motor back together, i'm getting hondata from him and will be taking it up there for tuning.

Re: anyone know about Payn for tunning?? (SpoolnG2)
 

Why don't you like the Mustang dyno? From my understanding, the load bearing Mustang dyno is better for tuning vs. the popular dynojets out there. I thought it better simulates real world conditions?

Re: anyone know about Payn for tunning?? (spooler)
 

i guess it might be. its just that a majority of dyno's are dynojets, so when u compare your numbers to someone else, they look low. i just think that since the majority uses the dynojet, thats what everyone basically goes by (almost like a standard)...no what i mean?

Re: anyone know about Payn for tunning?? (spooler)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooler &raquo;</TD></TR><TR><TD CLASS="quote">Why don't you like the Mustang dyno? From my understanding, the load bearing Mustang dyno is better for tuning vs. the popular dynojets out there. I thought it better simulates real world conditions?</TD></TR></TABLE>
exactly, puts a parasitic load on your car to get a good tune. he's tuned my car a few times and several of my friends. very nice guys at Payn Technologies.
heres my car on his AWD dyno
http://www.imagestation.com/picture/...4/fb510ab3.jpg
out front of his shop
http://www.imagestation.com/picture/...7/fb5275b7.jpg

Re: anyone know about Payn for tunning?? (GITWIDIT)
 

How much does tuning typically cost there?
Say I bought a hondata from Payne, took my car there had them put it in, then tune it, roughly how much would that cost, including the cost of s200b.

Re: anyone know about Payn for tunning?? (95civicex)
 

When I went dyno tuning was $160 an hour.

Re: anyone know about Payn for tunning?? (HXMan)
 

Yes, but its an hour of RUNNING/TUNING. if you have to change something, it isnt added onto the clock. I wonder what Toms gonna do w/my Twin H22 Sol? https://honda-tech.com/forums/images...es/emsmile.gif Thatll be something that he wont see every day!

Re: anyone know about Payn for tunning?? (Tinker219)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tinker219 &raquo;</TD></TR><TR><TD CLASS="quote">Yes, but its an hour of RUNNING/TUNING. if you have to change something, it isnt added onto the clock. </TD></TR></TABLE>

Huh?

BTW, Im not saying his price is bad.

Re: anyone know about Payn for tunning?? (HXMan)
 

https://honda-tech.com/forums/images/smilies/emthup.gif for payn, im going there in december

Re: anyone know about Payn for tunning?? (ProEater)
 

Im from MN too and I going to Payn next year for sure... heard too many good things https://honda-tech.com/forums/images/smilies/emthup.gif

Re: anyone know about Payn for tunning?? (HXMan)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HXMan &raquo;</TD></TR><TR><TD CLASS="quote">When I went dyno tuning was $160 an hour.</TD></TR></TABLE>
How long did it take to tune?

Re: anyone know about Payn for tunning?? (95civicex)
 

i'm set on the 24th.. got 2 cars to tune... one of the setups been tuned by him once b4, but with a smaller turbo... it may be a bit steep for the peeps who dont have much cash, but its sure worth the piece of mind....

i've seen and heard of too many people blowing up their setups bc they went the the FMU setup and or never got their cars tuned properly.. wat's better to u... $4-500 spent once on tuning, or $2,000(give or take a couple hundred) for a new motor, labor, and all the headaches that come w/ it...?? i prefer the 1st chioce..

Re: anyone know about Payn for tunning?? (95civicex)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95civicex &raquo;</TD></TR><TR><TD CLASS="quote">
How long did it take to tune?</TD></TR></TABLE>
roughly 2 hours to tune hondata around 12-14psi. keep in mind that you can't go dyno tune your car from 7psi and go straight to 20psi. you have to take gradual steps up to ensure safe conditions.

payn is a great place to go, i know tom payn, and devon personally. they are very friendly, and they know what they are doing. when i get my car done, and tunable, im going back to mi to see friends, and get my car tuned. i highly recomend these guys for the job

Re: (colorchangingt)
 

I agree with colorchanginggt they do some amazing work there. I know many friends who have also gone there that have had nothing but good shyte to say about them. I got my appointment booked for Oct2 for the day so I'll tell ya more then. https://honda-tech.com/forums/images...s/emsmilep.gif

Re: anyone know about Payn for tunning?? (GITWIDIT)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GITWIDIT &raquo;</TD></TR><TR><TD CLASS="quote">
roughly 2 hours to tune hondata around 12-14psi. keep in mind that you can't go dyno tune your car from 7psi and go straight to 20psi. you have to take gradual steps up to ensure safe conditions.</TD></TR></TABLE>
Ok, I'm just trying to get an idea for how much I'm going to have to save up for tuning and stuff. It would probably suck to have them get done tuning and end up being 80 bucks short or something.

Re: anyone know about Payn for tunning?? (92HB_HB)
 

I go up there the 23rd. Maybe I'll see ya

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92HB_HB &raquo;</TD></TR><TR><TD CLASS="quote">i'm set on the 24th.. got 2 cars to tune... one of the setups been tuned by him once b4, but with a smaller turbo... it may be a bit steep for the peeps who dont have much cash, but its sure worth the piece of mind....

i've seen and heard of too many people blowing up their setups bc they went the the FMU setup and or never got their cars tuned properly.. wat's better to u... $4-500 spent once on tuning, or $2,000(give or take a couple hundred) for a new motor, labor, and all the headaches that come w/ it...?? i prefer the 1st chioce..</TD></TR></TABLE>

Please be smart.. Dont drive to Detroit to get a tune.. If anything-- contact Issach from Elite (although he no longer works there) and see if he'll tune you.. If not-- wait until january and you will have 14 people who will want to tune your motor for CHEAP !!! Contact myself or Paul Vang for more details about local tuning..

Re: (Drag_On)
 

No one has the right equipment to tune hondata around here. Issac is still waiting for elite to get the s200 with datalogging so we can tune part throttle. I have talked to him. He said he can do it but my car has needed to be tuned for 4 months now. I get 21 mpg and it sucks. I have 250 whp and it feels like 200. I heard payn is really good at this. I just moved from fargo, Drag-On what do you drive? I am sure I have seen you before. Are you going to the tintmasters meet on the 20th? I will be there and you can see my car and see the problems. I can't wait until next year.

Re: (tslag)
 

If you want it done right the frist time go and see tom it is the only way to fly if you have any questions of what he is doing and why he will tell you and they have a great shop for anything you need done i have seen twin turbo boats to old hot rods with carb's just a great all around guys

Re: (JrCRXHF)
 

Yep that is where I am headed to get my shiz tuned! Everything I have heard/seen about Payn makes me confident that I will be happy going there. https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (TurboSedan)
 

heard great stuff about tom!! https://honda-tech.com/forums/images/smilies/emthup.gif
since he has a load bearing dyno he can tune partial throttle, not just WOT

mike

Re: (MikeMAN)
 

That is right, and that is badass. No need to drive around in order to tune partial throttle.

Re: (TurboSedan)
 

I'm lucky, my shop is in troy, about 3 miles from Payne https://honda-tech.com/forums/images...es/emsmile.gif
I'm going in march. still gotta setup that appt. http://images.honda-tech.com/set1//smile/emcrook.gif
But ya, i like them, they're cool guys.