Engine wont start
Thread Starter
Honda-Tech Member
Joined: Feb 2011
Posts: 115
Likes: 0
From: Cali
Engine wont start
Hey Ht..
soo i just swapped a 95 b18b1 into my eg. I re-did all of the seals and gaskets and all of that, but when changing out the head gasket and setting the engine to TDC so i thought. I read on line that TDC has to do with pistons 1 n 4 only and my DumbA** friend set pistons 2 n 3 to TDC instead of 1 n 4 sitting up.. Now my question is, if the engine is not set to TDC correctly will the car still start or will that throw anything out of wack? Now that this is wrong the distributor doesn't even send spark to the plugs or anything..
soo i just swapped a 95 b18b1 into my eg. I re-did all of the seals and gaskets and all of that, but when changing out the head gasket and setting the engine to TDC so i thought. I read on line that TDC has to do with pistons 1 n 4 only and my DumbA** friend set pistons 2 n 3 to TDC instead of 1 n 4 sitting up.. Now my question is, if the engine is not set to TDC correctly will the car still start or will that throw anything out of wack? Now that this is wrong the distributor doesn't even send spark to the plugs or anything..
Thread
Thread Starter
Forum
Replies
Last Post
datbuoylex69
Honda CRX / EF Civic (1988 - 1991)
9
Dec 13, 2002 06:28 AM
