what is the 1/4 time for the fastest (Da) 2nd gen integra 90-93!? thanks

 

I dont know about fastest but on cardoctorperformance.com they have a DA that ran 10.0@144 with 17psi. That is damn fast. Does anyone have any more info on this car. Id like to see what kind of weight reduction it had.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yimmy &raquo;</TD></TR><TR><TD CLASS="quote">I dont know about fastest but on cardoctorperformance.com they have a DA that ran 10.0@144 with 17psi. That is damn fast. Does anyone have any more info on this car. Id like to see what kind of weight reduction it had.</TD></TR></TABLE>

i think that was Jen Williams car. Jason hunt might be able to give a little more info on the car. Bump for a good thread!!!

 

Jen Williams da is the fastest i know about. What surprises me is they say its 2300 with driver and glass, thats impressive. Pest 1320 should easily have the fastest da when completed.

The street guys like g2turbo, spoolinG2, and myself are all shooting for 10's

 

Add me to that shooting for 10 sec list.


Modified by yimmy at 8:10 PM 1/10/2004

 

how fast did Tony Fuchs old car go...

 

Anyone know if FF draggers car is gonna be out this season?

 

It will be. He ran 12.xx on low boost towards the end of the fall.. Awesome car. Rich is gangsta

 

I think he only went 10.58 best and that was controversial on that run. He did run the 10.60s before. I just can't remember if he was running low 10's towards the end and tickling the 9 second territory.

 

what was so controversial

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quickda6 &raquo;</TD></TR><TR><TD CLASS="quote">The street guys like g2turbo, spoolinG2, and myself are all shooting for [B]low[B] 10's </TD></TR></TABLE>

Don't forget me!!

 

List your setup's DA's. Also, quickda6 how much was the fal rear window. Looks awesome

 

we are hoping to be the fastest d.a soon....may not look like it but the shell is a 93 integra

 

one more

 

Alot of other runs were controversial back then. Myles's 10.40 and Travis T.'s (rps crx) 10.82 are a few.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yimmy &raquo;</TD></TR><TR><TD CLASS="quote">List your setup's DA's. </TD></TR></TABLE>

Heres the basic rundown, should be finished up in the next week or two-

83mm GE Sleeved and deckplated B18c
JE 10:1
Custom Pauters
KG port/polish P72 head, 1mm over exh. valves, webcam, JG and EF1 valvetrain
Lovefab SST
Precision T4 PT61
Hondata 3b
1000cc injectors
B16 Quaife trans.
25x8.7x13 M&H's

 

Hot damn thats gonna be fast.

Im getting there slowly but sure. I switched from ls to gsr and ls parts arent bringing anything right now. Plans are as follows:

84mm GE sleeved B18C
CP 9.0:1
Crowers
Dunno about the head yet.
t3/t67
hondata s200b
1000cc
Need a tranny.

I will be using my crowers and my crank from my ls. Will that make the car any less reliable.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yimmy &raquo;</TD></TR><TR><TD CLASS="quote">Hot damn thats gonna be fast.

I will be using my crowers and my crank from my ls. Will that make the car any less reliable.
</TD></TR></TABLE>

Thanks. I am looking for 550+ whp which I don't see a problem ataining.

As far as the crank and rods go, you shouldn't have a problem. The only thing with using them though is essentially you now still have an LS engine. You will make more torque with those than a GS-R crank and rods.

-Ryan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTYdashONE &raquo;</TD></TR><TR><TD CLASS="quote">what was so controversial</TD></TR></TABLE>

low trap...I saw that run, but forgot the trap. He was lined up against the RPS Crx, which was also running high 10's (10.7-8). Tony couldn't back up the 10.58 that day @ Battle, but all I know is he KILLED the RPS car on that run.

 

jen williams car ran a stock b16a correct?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kwuaymaikrup &raquo;</TD></TR><TR><TD CLASS="quote">
Don't forget me!! </TD></TR></TABLE>

How could i forget, cant wait to see it

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yimmy &raquo;</TD></TR><TR><TD CLASS="quote">List your setup's DA's. Also, quickda6 how much was the fal rear window. Looks awesome </TD></TR></TABLE>
Thanks, got all three rear windows for 400shipped, nice but be prepared to be ineligible for sfwd.

My setup:

81.5mm ls block
JE 11.5.1 + eagle rods
Alainiz Ported b16 head
All ferrea valvetrain
S2 & CTR cams
JDM type r header(for now)
NXL Direct Port
AEM EMS
SX pump and reg and all AN lines
RC 320cc
B16 trans/Prodrive spool/ DSS axles
24.5 mickey t's+skinnies

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kwuaymaikrup &raquo;</TD></TR><TR><TD CLASS="quote">

Don't forget me!! </TD></TR></TABLE>

quit selling your parts !!!!!!...........and put that monster together

josh(quickda6). i cant wait to see your car out on the street. .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2.2Lcivic &raquo;</TD></TR><TR><TD CLASS="quote">
josh(quickda6). i cant wait to see your car out on the street. . </TD></TR></TABLE>

**** i cant wait to see YOUR car on the street
it already has 100 or so miles on it my brotha, i couldnt be happier cause everything is straight

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2.2Lcivic &raquo;</TD></TR><TR><TD CLASS="quote">

quit selling your parts !!!!!!...........and put that monster together

josh(quickda6). i cant wait to see your car out on the street. . </TD></TR></TABLE>

I am only selling the pump cause I found the right combo to make it work with a stock water pump and belt. I wish I was in PA. You guys seem to have a really good scene up there. As always quickda6, your car looks hot! now get some more vids.

 

Benson c5 block
9.8 :1 CP pistons
Manley (full race) rods
B16 head
Precision t4 gt35e
Precision IC, 1000cc injectors
Hondata
**** load of boost

thats the quick list. hopefully some 10's this year or next. Im broke as a joke and my car looks like this right now...






and finally some paint...