what do u guys recommend for a d16z6 nitrous motor with msd igntion,brand and gap.....any input will be

 

NGK BCPR7ES
Denso Iridium IK27

Gap shoul dbe around 28 unless it is blowing out the spark on the big end and than just gap smaller. You can also run colder if you would like.
BCPR8ES
IK29

 

from my experience with my nitrous set ups, i never needed that close of a gap unless i started running 100+ hp over stock.
i was running like 36-38 gap and never had probs with blowinth the spark out until i went crazy with the juice. and i have upgraded igntion too

 

How big of a shot? I run a .030 gap with a MSD 6AL. The plugs I use are NGK BKR7E. I'm using a ZEX dry kit with a 65 shot.

Gary

 

i have the nx express wet with a 75 shot now...i have the msd6al also