Whos got the quickest ZC? The quickest I've heard of so far was low 11s on a built ZC, 12.8 on stock internals.

 

Milles B. of REV HARD had one in his old school crx a long time ago it was sick fast - someone should know his times ??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RageDzine &raquo;</TD></TR><TR><TD CLASS="quote">Milles B. of REV HARD had one in his old school crx a long time ago it was sick fast - someone should know his times ??</TD></TR></TABLE>
that was the first car in the 11s and it was ZC powered. dont know the best time he got out of the setup before going with a B series but i just remember the milestone.
-Roger

 

It was like an 11.6 if memory serves me right. All motor hell the fastest I saw was dave from dh-racing.com went 13.20 back in like 97 still have the tmr with fastest times.

 

I have run 13.52@100mph on a stock bottom end ZC, with a 65 shot. This was also at an elevation of 5000ft above sea level. i think if I were to go to somewhere lower, like close to sea level, it would be in the high to mid 12's.

Gary

 

I went 12.41@111.29 on stock internals running 11lbs of boost at e-town.New set up in the works.,trying to work all the bugs out.I did manage to dyno 301whp on a rough tune and 20lbs boost. should be in the 11s this summer.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 86si &raquo;</TD></TR><TR><TD CLASS="quote">I went 12.41@111.29 on stock internals running 11lbs of boost at e-town.New set up in the works.,trying to work all the bugs out.I did manage to dyno 301whp on a rough tune and 20lbs boost. should be in the 11s this summer. </TD></TR></TABLE>

hey dave didnt know you were on here! good luck with your new setup.
-Roger

 

I just read mostly,i will be racing again on 8/28 in atco.My wife is expectng any day now.gotta chill for awhile!Do any testing at e-town on wed. Roger?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 86si &raquo;</TD></TR><TR><TD CLASS="quote">I just read mostly,i will be racing again on 8/28 in atco.My wife is expectng any day now.gotta chill for awhile!Do any testing at e-town on wed. Roger?</TD></TR></TABLE>

CONGRATS! good luck with that. hope to see you all out there soon. maybe will be at the track testing something tonight.
-Roger

 

There is a ZC somewhere here in the US that runs a 9.66 in a CRX. Its turbo, has a 89mm bore, and puts down 516whp. Has a full JG pro series head.

Thats the fastest i know.

Im shooting for 450whp in my ZC - although my car is a eg heavy bitch so ill prolly be in the 11s.

liam

 

89 mm bore zc?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by alld16a &raquo;</TD></TR><TR><TD CLASS="quote">89 mm bore zc?</TD></TR></TABLE>

Yes...he sleeved the block, and then overbored it to 89mm. Used custom pistons. It makes the ZC a 1.7litre.

liam

 

hey liam any chance that intake and TB would be for sale,nice pics of the motor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 86si &raquo;</TD></TR><TR><TD CLASS="quote">hey liam any chance that intake and TB would be for sale,nice pics of the motor </TD></TR></TABLE>

My ZC intake manifold? Actually yes it is for sale. However i dont have a throttle body for it.

liam

 

how much?Will it fit a d16a1 88 integra?


thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 86si &raquo;</TD></TR><TR><TD CLASS="quote">how much?Will it fit a d16a1 88 integra?


thanks</TD></TR></TABLE>

I believe it will fit yes....if you can use a ZC one it will.

Heres a picture.







Right now it doesnt have a throttle body. I had a GM 80mm throttle body on it. But it wouldnt be hard to put on a honda or whatever you want. You can use a stock or aftermarket fuel rail and whatever injectors you want.

Ill take $300 shipped for it.

thanks,
liam

 

I miss my ZC, hit 13.9 all motor with bolt ons (never opened up the motor!)

great little motor!