Well I went to island drag way this weekend for there last test and tune session. I knew my car had an 11 second run in it after that 12.07 at the import survival series.
My goal this year was to hit an 11 in my daily driver on stock block. I started the year out with a crappy 14.9. All I have added since then was a set of slicks and the v-afc hack instead of the FMU, check valve setup.
I just have to say thanks to everybody on H-T that helped me out through the year and pushed me in the right direction. Next year engine managment and my built motor goes in. thanks again...heres what the slip looked like.

R/T ..... .492
60'.......1.717
330......4.974
1/8.......7.645
MPH......93.63
1000.....10.002
1/4....... 11.998 (could I cut it any closer)
MPH......112.75

On another note if I didn't throw the CEL in third gear I know I could have had a much better time.




Modified by DOHCarp at 5:01 PM 11/25/2003

 

Congratulations on the stellar run! Set up? Turbo, boost setting?

 

Thanks 1320, the setup is a...

Stock B18B block
Stock B16a2 head
Max-rev manifold, turbo, and DP 2.5 in
3in exhaust
V-afc + 450 DSM's
car weighed in at 2370 with me in it
and had 24.5 X 9 X 13 Hoosier slicks
I was also running 9.5 Pounds.

 

Dont you usually round up when it's over .005? OH OH.

JK nice run! That hatch is extremely nice lookin!

 

Impressive. Judging by the E.T. vs. the mph, you drove the **** out of that thing. Well done.

 

Good job Chad.

 

You drove into a cemetary to take that pic? LOL! Awesome!

I remember reading just a few days ago about your 12.0 run...damn, nice job! Now build that bish and run 25+psi!

 

nice stock block?

 

congrats mang Impressive!

 

good job!

 

Congrats, wish i could run that time with a 112mph trap.

 

Bad *** pic!

 

Thats awesome Chad ...any winter upgrade plans?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black sohc civic &raquo;</TD></TR><TR><TD CLASS="quote">nice stock block?</TD></TR></TABLE>

Yup, Bone stock block and head excluding the arp head studs. Im still running the LS pistons , rods..everything.

Ron, I can't wait to be with the big boys in the heads up classes next year.....any other plans for your car next year?

Boostingsnail, I got lots of plans for next year....I would have had the built block in this year but since its my only car right now I didn't really have a chance to put her down for a few days....you'll deffinatly get to se it up at numidia next season.

Thanks Guys!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHCarp &raquo;</TD></TR><TR><TD CLASS="quote">
Ron, I can't wait to be with the big boys in the heads up classes next year.....any other plans for your car next year?!</TD></TR></TABLE>

It will be fun to race with ya man. as far as my plans. I just plan on runnin some good times and winning, thats all, The numbers will come. CoughninesCough

 

good job nice times

 

Damn nice.... that thing must hook hard off the line

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GITWIDIT &raquo;</TD></TR><TR><TD CLASS="quote">Damn nice.... that thing must hook hard off the line </TD></TR></TABLE>

It hooks extremely hard, but for some reason I've only broke one axel...im still running the stock ones.

Ron, I know you got a 9 in your car...I remember seeing it at maple grove when you blew your tranny...your runs looked sick. I actually think I got one of them on tape, I'll take a look.

Oh and just so everybody knows I didn't drive into a cemetary for the pick, my parents actually live right next to one so that was their front lawn .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHCarp &raquo;</TD></TR><TR><TD CLASS="quote">

Ron, I know you got a 9 in your car...I remember seeing it at maple grove when you blew your tranny...your runs looked sick. I actually think I got one of them on tape, I'll take a look.. </TD></TR></TABLE>

Yo, if you got it on tape, id kill for that tape, hehe, i just wanna see it, cause nobody has it

 

Congrats bro. I knew you would hit 11's before the season ended.

 

Congrats...running 11s that first time is the best feeling in the world, soon you'll be knocking on the 10s. Keep up the hard work! Brian

 

What rpm do you take it up to? Nice times and quite creative with the picturesque background

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecDA9 &raquo;</TD></TR><TR><TD CLASS="quote">What rpm do you take it up to? Nice times and quite creative with the picturesque background </TD></TR></TABLE>

I usually bring it up to 7400/7500 on the track. I still ahve a completly stock bottom end, no girdle or rods/rodbolts. I can deffinatly feel it still makes power up there......the last time I dynoed it I went to 7400 and the power was still increasing.

XXXracing, you got it right when I saw that slip I got out of the car and started jumping up and down...then they yelled at me for not having a cage...hehhe.

Oh and I did back the run up with a 11.999 @ 113

 

congrats on the times

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHCarp &raquo;</TD></TR><TR><TD CLASS="quote">
1/8.......7.645
</TD></TR></TABLE>

Daaaauuummm!
That's a hell of a time. We only have a 1/8th track here so I can imagine how fast that would be Very impressive with a non-built boosted motor. I can't wait to boost my Eg/GSR. Oh, and that hatch is so damn sexy!!!