Honda-Tech - Honda Forum Discussion - Dart vs sleeved block

Page 3 of 3

Show 40 post(s) from this thread on one page

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)

- Drag Racing (https://honda-tech.com/forums/drag-racing-36/)

- - Dart vs sleeved block (https://honda-tech.com/forums/drag-racing-36/dart-vs-sleeved-block-2773217/)

Garage 808 Hatch

04-01-2011 10:50 AM

Re: Dart vs sleeved block

Quote:

Originally Posted by 2k.civic.si (Post 44988605)

AHHHHHH bullshit CHOOOOO

I didnt know this fell into your electrical engineering know it all field?

LightningTeg

04-01-2011 01:51 PM

Re: Dart vs sleeved block

Quote:

Originally Posted by Garage 808 Hatch (Post 44967049)

I would hope they fixed it for free, but what compensated him for all his time to R&R the motor, reassemble, new HG etc? At least GE pressure tests the blocks before they are shipped

It wasnt that severe of an issue. It would eat coolant very slowly when the car was really beat on. So he had it running awhile before he actually figured it was the block

2k.civic.si

04-23-2011 10:58 PM

Re: Dart vs sleeved block

Quote:

Originally Posted by Garage 808 Hatch (Post 44988741)

I didnt know this fell into your electrical engineering know it all field?

i have more then one degree....and i have plenty of experience with ge blocks ;)

P-CRIDER

04-25-2011 06:31 AM

Re: Dart vs sleeved block

Quote:

Originally Posted by Garage 808 Hatch (Post 44967045)

GE or AEBS

+1 on the aebs

95B18BTurbo

04-25-2011 11:32 AM

Re: Dart vs sleeved block

After destroying the sleeves in 4 stock sleeved ls blocks, spining a rod bearing in a gsr block, I finally went with a GE sleeved 84mm block and have zero complaints about it. I absolutely love it and it is taking abuse that my stock blocks would have not. I have no experiance with DART blocks, but I have heard of many people having issues with them.

All times are GMT -8. The time now is 05:41 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page