sorry but as title reads I like to know how to do this on my ampilier

I know something about electronics but never figured this


thanky ou to all that may respond

 

You don't do it on the amp, you do it with the speakers, two 4ohm speakers wired in parallel will get you a 2ohm load, go to http://www.the12volt.com on the left, under car audio, clik on parallel & series. 94

 

thanks

i still don't get it

I might just wait till I get the fiberglass enclosure in the trunk

 

2 DVC drivers with Voice Coils in Series / Parallel
Connecting the two voice coils of each driver in series (+ to -) and the drivers themselves in parallel (+ to +, etc.) will result in the following impedances:
Dual-6 Ohm Subwoofers: 6 Ohms
Dual-4 Ohm Subwoofer: 4 Ohms
Dual-2 Ohm Subwoofer: 2 Ohms





2 DVC drivers with Voice Coils in Parallel / Parallel
Connecting the voice coils of each driver in parallel (+ to +, - to -) and the drivers themselves in parallel (+ to +, etc.) will result in the following impedances:
Dual-6 Ohm Subwoofers: 1.5 Ohms
Dual-4 Ohm Subwoofers: 1 Ohm
Dual-2 Ohm Subwoofers: 0.5 Ohm

 

id read the wiring specs online for your amp

 

How about series/series?
Or Parallel/ Series?

Or how about the first subs coils in parallel with the second subs coils in series now these to subs wired in parallel.
Lol just having fun

Dual-6 Ohm Subwoofers: 2.4 Ohms
Dual-4 Ohm Subwoofer: 1.6 Ohms
Dual-2 Ohm Subwoofer: .8 Ohms