Slaberdy's [Spoon EG6 Build!]
 

just scooped up a 94 hatchback. plans are: carnival yellow and every spoon part imaginable! https://honda-tech.com/forums/images...s/emcocktl.gif PLUS fully gutted.

https://i14.photobucket.com/albums/a...R/IMG_1801.jpg

some parts layin around. http://is.rely.net/1-92-29998-l-1gbM...AmVuBW3hGg.gif money cat just chillin http://is.rely.net/1-92-56342-l-HDIv...QjldAGcqmQ.gif

PARTS I HAVE:
Spoon Bars F + R
Spoon lugs
Spoon steering wheel
Spoon Burnt Ti knob
Spoon 100mm under mirror stickers (black)
Spoon 800mm rear windshield banner (white)
Spoon reservoir covers
JDM B16A swap
TEIN Flex's NON ITR/EG6 app.
USDM ITR front seats (temporary)
GSR F + R suspension


PARTS I NEED:
[ ] Spoon Duckbill
[ ] Spoon lip
[ ] Momo Hub (EG/DC)
[ ] JDM thin side moldings
[ ] Stanley sidemarkers
[ ] JDM headlights + corners
[ ] JDM taillights
[ ] SW388 15"
[ ] Spoon ABS plastic OG mirrors
[ ] Advan stickers (above sidemarker)
[ ] Fenders L + R
[ ] Spoon calipers
[ ] Spoon street exhaust
[ ] Spoon rear lower tie bar
[ ] JDM EG6 cluster

This build will mainly be focused on exterior... I have a few things that im changing up so it wont be 100% replica of the best motoring eg6 https://honda-tech.com/forums/images/smilies/emthup.gif

GOAL = http://www.jaydm.com/spoon/images/eghood_lip.jpg


Modified by slaberdy at 10:50 AM 6/11/2008

Re: Slaberdy's [Spoon EG6 Build!] (slaberdy)
 

lmao holl@ at this balla building a spooooooon mobile haha

i <3 poon. i mean spoon! hollaaaaaa

Re: Slaberdy's [Spoon EG6 Build!] (A.C. Slater)
 

good luck on build, money cat would come in handy https://honda-tech.com/forums/images...es/emsmile.gif

LOL imma have to break it soon! :/

Re: (slaberdy)
 

w0w! this guy hopped on the build thread bandwagon lol

[freak] that kitty up and break it. Spoon > $ kitty

lmao! this is gonna be a slow ass mo[freak]in build ill tell u that!

http://www.jaydm.com/spoon/images/eghood_lip.jpg

i need to drop some dough to make it look like this!

Re: (slaberdy)
 

pics of ur hatch..

no pics right now.... will have some up tommorow

Re: (slaberdy)
 

good luck with the build https://honda-tech.com/forums/images/smilies/emthup.gif ... with purchasing almost every spoon part available i hope your rich

Re: (HcOiNvDiAc)
 

damn that will be fawkin expensive. so your ballin dd stays out of the garage for a honda build...lol tight i would too lol https://honda-tech.com/forums/images/smilies/emthup.gif

thanks ppl! i already have front and rear strut bars, lugs, ti knob, misc stickers, steering wheel... big money parts near the end (calipers, seats, etc)

Re: (slaberdy)
 

Time to sell parts off your ek. (;

youll be the first to know! https://honda-tech.com/forums/images...es/emsmile.gif

Re: (slaberdy)
 

Mk, you know my number. (: http://is.rely.net/1-92-56342-l-HDIv...QjldAGcqmQ.gif

Re: (slaberdy)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slaberdy &raquo;</TD></TR><TR><TD CLASS="quote">lmao! this is gonna be a slow ass mo[freak]in build ill tell u that!</TD></TR></TABLE>

Since you gotta buy every spoon part possible, you do know you gotta cough up the dough and buy a Spoon crate motor right? http://is.rely.net/1-92-30009-l-tEzP...BTGi0jOCgA.gif

wanna take some donations? haha

Re: (HBK GABE)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HBK GABE &raquo;</TD></TR><TR><TD CLASS="quote">

Since you gotta buy every spoon part possible, you do know you gotta cough up the dough and buy a Spoon crate motor right? http://is.rely.net/1-92-30009-l-tEzP...BTGi0jOCgA.gif

wanna take some donations? haha</TD></TR></TABLE>


Haha says the *** doing the mexican head bobble on ebay coils https://honda-tech.com/forums/images...s/emsmilep.gif https://honda-tech.com/forums/images...s/emsmilep.gif

Re: (A.C. Slater)
 

Head bobble ftw!

stiff shocks make the ride bouncy as hell, but it helps when your car gets thrown into the air on the highway and don't gotta worry about bottoming out. https://honda-tech.com/forums/images...s/emsmilep.gif

Re: (HBK GABE)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HBK GABE &raquo;</TD></TR><TR><TD CLASS="quote">

Since you gotta buy every spoon part possible, you do know you gotta cough up the dough and buy a Spoon crate motor right? http://is.rely.net/1-92-30009-l-tEzP...BTGi0jOCgA.gif

wanna take some donations? haha</TD></TR></TABLE>
shit i wish... just onna have a b16 in it lmao! and tein flex's.. which was my choice

just finished putting better condition doors and rear tailgate on.. and stripping the shit out of the interior

worthless updates...at least take some cell phone pics. https://honda-tech.com/forums/images...s/emsmilep.gif

Re: (Smokinsax)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax &raquo;</TD></TR><TR><TD CLASS="quote">worthless updates...at least take some cell phone pics. https://honda-tech.com/forums/images...s/emsmilep.gif</TD></TR></TABLE>
https://honda-tech.com/forums/images...s/emhammer.gif

We need pics bish!

Re: (CHINKA)
 

in for this build! you should make your build thread on that other forum. it's better.

no one told me about the other forum https://honda-tech.com/forums/images/smilies/emsad.gif

Re: (slaberdy)
 

https://i14.photobucket.com/albums/a...R/IMG_1820.jpg
just finished washing most of the crap aka leaves off. and threw on my k1's for it to roll.

https://i14.photobucket.com/albums/a...R/IMG_1813.jpg

https://i14.photobucket.com/albums/a...R/IMG_1807.jpg

https://i14.photobucket.com/albums/a...R/IMG_1809.jpg

https://i14.photobucket.com/albums/a...R/IMG_1821.jpg

https://i14.photobucket.com/albums/a...R/IMG_1823.jpg

https://i14.photobucket.com/albums/a...R/IMG_1822.jpg

https://i14.photobucket.com/albums/a...R/IMG_1824.jpg

still a ways to go.. https://honda-tech.com/forums/images...es/emdgust.gif

Re: (slaberdy)
 

sexy legs!

hahaha i try!

Re: (slaberdy)
 

update: stripped more of the interior and started sanding down the engine bay for paint this week! http://is.rely.net/1-92-30009-l-tEzP...BTGi0jOCgA.gif

damn, there's a long way to go. This should be interesting...

Re: (hushypushy)
 

holler at this baller right hurr

yeah working on my engine bay the majority of the time so i can put my motor in and start it up!

How DARE you!!! Hahahahaha.... I'll be watching you hahaha

lmao. i told u before i was going to build a spoon'ed eg...

Re: (slaberdy)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slaberdy &raquo;</TD></TR><TR><TD CLASS="quote">lmao. i told u before i was going to build a spoon'ed eg... </TD></TR></TABLE>

Hahaha, na thats dope. There has been many others before us. I am hoping I can do it a little different https://honda-tech.com/forums/images/smilies/emwink.gif

yeah.. ive seen spoon themed eg's before but some used the wrong parts/combo.

Re: (slaberdy)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slaberdy &raquo;</TD></TR><TR><TD CLASS="quote">yeah.. ive seen spoon themed eg's before but some used the wrong parts/combo. </TD></TR></TABLE>

Yea my build is more like SPOON is the HEART and YELLOW is the THEME hahaha

Well watching ur car being built will definitly make me probably actually work on my car hahahaha.

brian your such a......nvm


cant wait to see moar progress!!!

Re: (CHINKA)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by *****A &raquo;</TD></TR><TR><TD CLASS="quote">brian your such a......nvm

cant wait to see moar progress!!!</TD></TR></TABLE>
Ohh, this is the guy with the midori that's taking you to IA...