Do you guys mind showing me some pics of the in-car camera mounts you use and where you purchased them from?? I want to get one before We-Todd 3..

 

ChaseCams, I have their Tri-Suction Mount, it works great.

Here's an in-car video I took at the drag strip with it.

 

ian, you can kind of see it
its from io port racing

 

Marc, how much vibration if any ?? How nice do the vids turn out?

 

theres no vibration i can detect at all...

at the base is rubberish mount thats design to eliminate it
its the thing in red:



http://www.ioportracing.com/Me...=IOPP

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueR &raquo;</TD></TR><TR><TD CLASS="quote">theres no vibration i can detect at all...

at the base is rubberish mount thats design to eliminate it
its the thing in red:



http://www.ioportracing.com/Me...=IOPP</TD></TR></TABLE>

I got the same one. Got it from Safe Drives here on honda-tech (a HT sponsor)

 

Another IO port owner here... Hands down the best bang for the buck for one. Vibration is very minimal due to the red bushing you see. And it's 3 axies (is that right?) adjustable.

 

Cool, so yeah i like the io port one, i looked at yours dave at CMP, its pretty nice. I think i might go with that one.

 

hate to bring this back from the dead but i got see info i wanted to mark.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dave_B &raquo;</TD></TR><TR><TD CLASS="quote">Another IO port owner here... Hands down the best bang for the buck for one. Vibration is very minimal due to the red bushing you see. And it's 3 axies (is that right?) adjustable.</TD></TR></TABLE>

What is the MSRP on that one dave?

and maybe i can borrow yours for a lap at expo

 

Ian,

I used the IOPort mount as well and it never dissatisfied me.

Hope you're doing well.

 

ive got a pretty basic one.

a bar that runs across the two seatbelt holes in the rear of the car. each end of the bar has threads so i can tighten them down.

then the actual mount is stuff you can buy from lowes/home depot. some U clamps and if you find the right threaded clamp, it actually threads into the camera.

ill try to get pics at some point

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">

What is the MSRP on that one dave?

and maybe i can borrow yours for a lap at expo </TD></TR></TABLE>

I believe mine was around $100 for it.

I would let ya borrow it, but it's a PITA to get it in the exact same spot again.

 

IO Port here as well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GO-FIGHT-KILL &raquo;</TD></TR><TR><TD CLASS="quote">ChaseCams, I have their Tri-Suction Mount, it works great.

Here's an in-car video I took at the drag strip with it.</TD></TR></TABLE>

i watched the vid and was reading peoples opinions and found this haha

" i think an SRT-4 could do all that and more for a few thousand dollars less SRT-4's are beat to sh*t at the racetrack on weekends and then to work as a daily driver trapping speeds over 100mph+ stock. and believe it or not hold on remarkably well reliability wise being a dodge neon and all. I would think the SRT-4 is the best FWD ever created, only thing it lacks is good looks and even then a few small exterior mods and they are hot."

best fdw car created lmao
sorry not try to to be off topic but had to post this

 

^^ LOL. Nice find.

 

Possible for a camera mount if I dont have a cage?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beat &raquo;</TD></TR><TR><TD CLASS="quote">Possible for a camera mount if I dont have a cage?</TD></TR></TABLE>
Get a B or C pillar bar to use.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dave_B &raquo;</TD></TR><TR><TD CLASS="quote">

I believe mine was around $100 for it.

I would let ya borrow it, but it's a PITA to get it in the exact same spot again.</TD></TR></TABLE>

OH i thought it would be a lot more than that .

For 100$ , ill just go buy on 0ne before expo ,
What's the link for the company that makes the mount that you guys have ?


Whats the deal with the suction cup cameras? i'm very interested in Buying a few of them of they are a reasonable price .
Does anyone Have any experience with those suction cup cameras?

 

Ian... go for the behind the ***** shot. Best camera angle evaR.

 

i plan to buy the IO port for my race car that has a cage.

but for my daily driver i use the one in the link below and have great results.

http://cgi.ebay.com/Camera-Win...wItem

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrecisionH23a &raquo;</TD></TR><TR><TD CLASS="quote">Ian... go for the behind the ***** shot. Best camera angle evaR.</TD></TR></TABLE>

LOL