I have a GSR now but i might get a JDM front later. At the moment i want to get a HID kit, will the HID kit that fit on my usdm front fit on the jdm one (if and when i decide to change it)?

 

It will fit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B2FiNiTY &raquo;</TD></TR><TR><TD CLASS="quote">It will fit. </TD></TR></TABLE>
Are you talking about an aftermarket kit, or the OEM Honda HID's?

 

it will fit if u get the non-hid housings...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B2FiNiTY &raquo;</TD></TR><TR><TD CLASS="quote">It will fit. </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WiggiE &raquo;</TD></TR><TR><TD CLASS="quote">
Are you talking about an aftermarket kit, or the OEM Honda HID's?</TD></TR></TABLE>

aftermarket, lets say McCulloch 5000 series. If I get the USDM integkit now and go with JDM front, I should be able to swap my McCulloch without modification right? What about the JDM HID housing? Are they bigger than the US normal housing?

 

I believe that they both use 9006 bulbs so you wouldnt have any fitment problems.

Someone correct me if I am wrong.

Regards,

Steve

 

You are correct

NON-HID JDM Housings use 9006 projector for lowbeam, as the USDM lowbeams. They can fit in either!

 

just curious, what is the housing for the JDM HID?

 

The housing is for a D2S HID bulb. In fact they use the same projectors as the S2000.

 

All OEM HID uses D2S unless they are in reflector housings, then they typically use D2R.

 

thanks