I have a 99 integra with a B16A Vtec and I am interested in getting a good quality cold air intake. Any advice on what I should go with? I intend to turbo-charge the car in the future if that makes a difference. I'm going for performance! Thanks

Charissa

 

Go on ebay, or nopi, get the CHEAPEST short ram intake you can find. It will be in the neighborhood of $20. It is no better or worse than a $200 AEM V2. Stick a K&N Filter on the end of it, and if your feeling adventurous wrap it up with exhaust tape, maybe make a spiffy little heat shield for it. But always buy the cheapest tube, a tubes a tube.

 

Thanks so much, I'm new to modifying cars and I do not want to get dicked over for money, I'm sure I'll have many more questions in the future!

 

if you live in a area where it tends to rain or flood a lot, then I'd look into the comptech ice box sytem or just a short ram intake. Everyone who runs these cold air intakes in the winter time usually ends up hydrolocking their motor, then coming onto h-t to complain about it.

 

J'S RACING CF INTAKE!

 

i almost lost my motor go SRI!!!! i was lucky and no water was sucked up with my CAI. its staying off now til summer haha!

 

3" sri, bpi stack w/ a k&n filter

^^^^best intake you'll ever need/use.

 

if you plan on DDing your teg. don't get cool air. if it rains your screwed on less you have a bypass. just get a short ram and heat tape it. don't buy anything ecspencive, b/c its just a 3'' tube w/ a filter.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcvtec.integra &raquo;</TD></TR><TR><TD CLASS="quote">J'S RACING CF INTAKE! </TD></TR></TABLE>

x2

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nympholept1218 &raquo;</TD></TR><TR><TD CLASS="quote">I have a 99 integra with a B16A Vtec and I am interested in getting a good quality cold air intake. Any advice on what I should go with? I intend to turbo-charge the car in the future if that makes a difference. I'm going for performance! Thanks

Charissa</TD></TR></TABLE>

LSVtec or straight B16?

 

i got a badass one on ebay it was like $35 shipped just look around and find one u like and make sure it has a legit quality percent and all that good stuff....but there is really no point for spending $260- on a aem its just because it says aem on it.....its bs

 

It's an LS Vtec

 

just get a cone filter and drop it in the stock airbox if you are going to turbo later.

 

What tranny LS or B16?

Screw turbo. NA all the way.

 

Comptech Ice Box FTW, and i agree stay all motor!

 

None of you mentioned anything about being carb legal. I'm not sure how it is in PA, but if cops are bad, you may want to think about getting an AEM. They are perfectly legal to have and will help avoid fines in the future if the law ever tries to get you.

 

I dont think emissions was that big of a problem in PA. I never had a problem. Although I only had my stock airbox with a comptech filter in it. Who knows..

 

Here in Texas, NO ONE gets messed with for illegal car parts. Seriously, I can't even imagine what you guys go through. Do cops just pull you over and sit your car up on a jack, looking for illegal parts? I guess I don't get it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phuc yiu &raquo;</TD></TR><TR><TD CLASS="quote">I dont think emissions was that big of a problem in PA. I never had a problem. Although I only had my stock airbox with a comptech filter in it. Who knows..</TD></TR></TABLE>
Stock air box + comptech filter

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrdeadman &raquo;</TD></TR><TR><TD CLASS="quote">
Stock air box + comptech filter </TD></TR></TABLE>

Waste of money

 

Anyone have some advice on an exhaust? I was thinking chambered. I want a nice deep sound but not so damn loud that people can hear me a mile away.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nympholept1218 &raquo;</TD></TR><TR><TD CLASS="quote">Anyone have some advice on an exhaust? I was thinking chambered. I want a nice deep sound but not so damn loud that people can hear me a mile away.....</TD></TR></TABLE>

the apexi ws2 is good, for a nice deep sound.

 

Iceman

some good old school ****!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dseries_ef &raquo;</TD></TR><TR><TD CLASS="quote">

the apexi ws2 is good, for a nice deep sound.
</TD></TR></TABLE>

x2

 

If you don't want loud, then yeah WSII or you could try the RSR Ex-Mag. Either or.