Best Place to Get Headwork Done
 

Hey guys, just to start with, I tried searching for threads on this and i'm sorry if this is a repost, and if it is maybe I didn't use the right search terms or something. If this has been covered and you know where the thread on it is, please kindly point me in that direction.

That being said, I have a JDM D15B head and i'm wanting to get a little work done on it. (3-angle valve job, hot tanked/cleaned, new seals, reassembly, and possibly a mild port & polish if the price isn't crazy high).

I'm wondering what shops you guys recommend. (preferably the types of shops that you contact via e-mail or phone and send in your head to get worked on)

I'm looking for the least expensive shop to go with that still does quality work. Trust me, i'm not looking to cheap out, just looking to get a good deal.

Thanks for any input you may have.

Re: Best Place to Get Headwork Done
 

performance porting

Re: Best Place to Get Headwork Done
 

Thanks, it turns out that I actually have talked to him before on another forum and he really knows what he's talking about, and his prices are pretty good, so I sent him an e-mail.

Re: Best Place to Get Headwork Done
 

emailed you back :)

Re: Best Place to Get Headwork Done
 

replied :thumbup:

Re: Best Place to Get Headwork Done
 

Steve @ CCCylinderHeads.com

Re: Best Place to Get Headwork Done
 

Steve and RLZ seem to be the best from what I gather-

Re: Best Place to Get Headwork Done
 

Endyn!

Re: Best Place to Get Headwork Done
 

x2

Re: Best Place to Get Headwork Done
 

www.theoldone.com
Go through there site and read some of there articles. There is no one else I would rather have do that type of work then them. My friend alex had an engine done by them that was a 1.8 gsr that made 225 to the ground. cheap, fast, reliable..... Pic two, thats all you get.

Re: Best Place to Get Headwork Done
 

steve from cccylinderheads.com is the shit

look at my thread and thats the head he did for me https://honda-tech.com/forums/showth...2525398&page=2 there my proof

Re: Best Place to Get Headwork Done
 

x3

Re: Best Place to Get Headwork Done
 

http://www.portflow.com/

thread over.

Re: Best Place to Get Headwork Done
 

Re: Best Place to Get Headwork Done
 

rlz

Re: Best Place to Get Headwork Done
 

Me nuff said!!!!!! https://honda-tech.com/forums/members/b20vtech-999448128/

Re: Best Place to Get Headwork Done
 

i had my head done by steve and will hopefully have some dyno tests up as soon as my new headgasket arrives and i find time to put it on.

but, RLZ recommends Combustion Contraption if they do not want to wait for their work so that must tell you something about steves work.

I dont think you could go wrong with any of the following:

RLZ
CC
Endyn
Portflow
Mike Belben (if you can get him to do one for you, not sure of his status)

Re: Best Place to Get Headwork Done
 

cc for sure

Re: Best Place to Get Headwork Done
 

And after all Ive done for you.

http://badadvice.typepad.com/.a/6a00...aea2970c-800wi

Re: Best Place to Get Headwork Done
 

Since you live in Fl you can go to Xtreme Cylinder Heads in Palm City. Bill knows his shit and has a Newen BB Contour for vj's.

Re: Best Place to Get Headwork Done
 

Take your pick.

RLZ
DonF
Fkned
CCC
Portflow
Endyn

Re: Best Place to Get Headwork Done
 

Are you sure you need head work? with a basically stock motor thats daily driven there could be (well there are) other areas that would gain more power per dollar spent.

Re: Best Place to Get Headwork Done
 

x4

Re: Best Place to Get Headwork Done
 

All these people that are saying endyn are halarious and probably didn't get work done with the. RLZ or Portflow are the best for head work and I can say that from experience. Endyn has done heads and lost power.

Re: Best Place to Get Headwork Done
 

Yeah OK.... So Im assuming you have no experience with Endyn?
I assume you are ignoring all of the positive responses from the Endyn followers.
Oh and you prolly heard that Larry works out of his basement. Endyn is just a fake shop also.

All I will say is that the stuff they make works.