PLEASE HELP!! Can't turn key in ignition
I drove my car( 92 hatch ) to get some lunch yesterday and when i came out i tried to put the key in and start the car....well it will go half way to the first position, just enough to freely turn the wheels and that's it. the key will not go any further. i turned the wheels every way possible and still nothing. i was going to pull the ignition crap out and just use a toggle switch to turn on the accessories and then use a push button to start.....then i was going to buy one of those steering wheels with the quick releases( racing steering wheel ) on them to prevent theft can anybody tell me which wires i need to hook up to the toggle switch and to the push button. thanks a lot in advance.
|
Re: PLEASE HELP!! Can't turn key in ignition (psychotic_civic)
well heck i would settle for any suggestions as to getting the key to turn....im afraid they are gonna tow my car from the parking lot soon
|
Re: PLEASE HELP!! Can't turn key in ignition (psychotic_civic)
just sounds like ur steering wheel is locked but im sure its something else just not sure what what cause it to do that? i know its dumb but u try moving the steering wheel around while tryin to turn key
|
Re: PLEASE HELP!! Can't turn key in ignition (psychotic_civic)
Here you go. Follow the steps that are underlined in blue to start your car.
https://img329.imageshack.us/img329/...tcares1.th.jpg or to replace the whole lock and cylinder http://www.tegger.com/hondafaq/lockcylinder.jpg http://www.tegger.com/hondafaq/igntionswitch.jpg Larger Image of How to Start Car: http://img329.imageshack.us/im...1.jpg 4:20 https://honda-tech.com/forums/images...es/emsmile.gif |
Re: PLEASE HELP!! Can't turn key in ignition (celltoolz)
AWESOME!!!! thanks man youre a life saver. now that's a redneck ignition system...hehe so would i need to make the push start like this...
Toggle Switch: These wires on on side of the switch White/Red Blue/White Black/Yellow Yellow and the White/Black wire on the other side Push Start: Black/White wire on one side and the White wire on the other Modified by psychotic_civic at 9:30 AM 4/20/2008 |
Re: PLEASE HELP!! Can't turn key in ignition (psychotic_civic)
did you ever get your car to start?
|
Re: PLEASE HELP!! Can't turn key in ignition (odd22004)
sure did....it is scary knowing that i never done anything like this in my life and it took me less than 3min to start my car with a screwdriver....i went outside and looked at the back of the ign switch and found which wires do what
Beige=Battery Beige/Black=Acc Black/Yellow=IG1 Black/White=Starter Yellow=IG2A So with this wiring how can i rig it up with a toggle switch and push start This would be my guess: Toggle: Beige on one side other side would be: Beige/Black Black/Yellow Yellow Push Start: Beige on one side Black/White on the other |
All times are GMT -8. The time now is 04:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands