crx roll cage w/ stock interior
I have asked people before if a cage would be put in and still keep a mostly stock interior and i was always told NO.
well i just found this crx on ebay i was wondering though if in this case does it actually have any safety though... or just looks... http://i13.piczo.com/view/h/0/r/u/8/...77_67915_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...89_39388_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...97_52014_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...11_33566_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...20_15854_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...2026_796_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...035_1183_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...40_26283_7.jpg http://i13.piczo.com/view/h/0/r/u/8/...050_7865_7.jpg i contacted the seller and he said i could post up pics of it. the auction url is: http://cgi.ebay.com/ebaymotors...wItem |
Re: crx roll cage w/ stock interior (stemiched)
You can have a cage and all stock interior (cut, but all in there)...
I have posted an old picture of a cage (terrible picture). My biggest consorn is where the location is for the rear mounts. Weak part of of the chassis to bolt/weld.....I'd like to see them in a different location, closer/on the strut towers. http://www.jdmcars.com/gallery...1.JPG |
Re: crx roll cage w/ stock interior (stemiched)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stemiched »</TD></TR><TR><TD CLASS="quote">I have asked people before if a cage would be put in and still keep a mostly stock interior and i was always told NO.</TD></TR></TABLE>
I don't know who the hell you were talking to, because I've been driving my CSP/TTE full-interior '91 CRX with a 4-point custom welded-in SCCA/NASA-legal roll bar for years now. Regarding that eBay car, A) That is not a "roll cage." It's a roll bar with NHRA-style front supports (which I highly recommend against having unless you are required to run them by the NHRA). B) That bar is a bit poor-fitting. The main hoop doesn't come close to the pillars at all. C) I am not a fan of the design. There is no triangulation with the main hoop or rear supports - and no harness bar or diagonal either. The rear supports are also too close together, and their baseplates are on a weak part of the chassis. <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmcars.com »</TD></TR><TR><TD CLASS="quote">http://www.jdmcars.com/gallery...1.JPG</TD></TR></TABLE> That is one of the crappier harness installations that I've seen. That's an Autopower bar, so why didn't they get/use the optional harness bar? |
Re: crx roll cage w/ stock interior (stemiched)
|
Re: crx roll cage w/ stock interior (stemiched)
hellll yyyeaaa https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images...es/emsmile.gif
|
Re: crx roll cage w/ stock interior (killafred187)
https://i131.photobucket.com/albums/...6/DSC00410.jpg
https://i131.photobucket.com/albums/...6/DSC00409.jpg https://i131.photobucket.com/albums/...6/DSC00408.jpg https://i131.photobucket.com/albums/...6/DSC00407.jpg http://i131.photobucket.com/albums/p...6/DSC00411.jpgstfed86/DSC00406.jpg[/IMG] Drive Safe 10 pt |
Re: crx roll cage w/ stock interior (doublethink)
look where it mounts behind the seats...in that case look @ everywhere it mounts...that is pure suck, seriously. But i guess for looks to the untrained eye that is badass https://honda-tech.com/forums/images...s/emthdown.gif traction control < style FTMFL https://honda-tech.com/forums/images/smilies/emsad.gif
|
no. that roll cage is not safe.
|
Re: (Hiii Im TYLER)
how about you elaborate on that a little bit.
|
Re: (the4g4d)
Its not NHRA legal, you can't grind the welds https://honda-tech.com/forums/images...s/emthdown.gif
|
yea why would u grind the welds...not cool
|
Re: crx roll cage w/ stock interior (killafred187)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by killafred187 »</TD></TR><TR><TD CLASS="quote">hellll yyyeaaa https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images...es/emsmile.gif </TD></TR></TABLE>
You brought back a week old thread to say this? |
Re: (Sikocivic)
Welds weren't grinded.... Just added a little filler over them.
|
Re: (the4g4d)
nice.
|
All times are GMT -8. The time now is 01:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands