stemiched

I have asked people before if a cage would be put in and still keep a mostly stock interior and i was always told NO.

well i just found this crx on ebay

i was wondering though if in this case does it actually have any safety though... or just looks...









i contacted the seller and he said i could post up pics of it. the auction url is: http://cgi.ebay.com/ebaymotors...wItem

jdmcars.com

You can have a cage and all stock interior (cut, but all in there)...
I have posted an old picture of a cage (terrible picture).

My biggest consorn is where the location is for the rear mounts. Weak part of of the chassis to bolt/weld.....I'd like to see them in a different location, closer/on the strut towers.

http://www.jdmcars.com/gallery...1.JPG

Targa250R

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stemiched &raquo;</TD></TR><TR><TD CLASS="quote">I have asked people before if a cage would be put in and still keep a mostly stock interior and i was always told NO.</TD></TR></TABLE>
I don't know who the hell you were talking to, because I've been driving my CSP/TTE full-interior '91 CRX with a 4-point custom welded-in SCCA/NASA-legal roll bar for years now.

Regarding that eBay car,

A) That is not a "roll cage." It's a roll bar with NHRA-style front supports (which I highly recommend against having unless you are required to run them by the NHRA).

B) That bar is a bit poor-fitting. The main hoop doesn't come close to the pillars at all.

C) I am not a fan of the design. There is no triangulation with the main hoop or rear supports - and no harness bar or diagonal either. The rear supports are also too close together, and their baseplates are on a weak part of the chassis.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmcars.com &raquo;</TD></TR><TR><TD CLASS="quote">http://www.jdmcars.com/gallery...1.JPG</TD></TR></TABLE>
That is one of the crappier harness installations that I've seen. That's an Autopower bar, so why didn't they get/use the optional harness bar?

doublethink

they did a damn clean job there.

killafred187

hellll yyyeaaa

the4g4d

stfed86/DSC00406.jpg[/IMG]


Drive Safe 10 pt

89efDUSTY

iTrader: (4)

look where it mounts behind the seats...in that case look @ everywhere it mounts...that is pure suck, seriously. But i guess for looks to the untrained eye that is badass traction control &lt; style FTMFL

Hiii Im TYLER

no. that roll cage is not safe.

the4g4d

how about you elaborate on that a little bit.

Sikocivic

Its not NHRA legal, you can't grind the welds

uberhaulin

yea why would u grind the welds...not cool

hafftrak

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by killafred187 &raquo;</TD></TR><TR><TD CLASS="quote">hellll yyyeaaa </TD></TR></TABLE>

You brought back a week old thread to say this?

the4g4d

Welds weren't grinded.... Just added a little filler over them.

The Si

nice.