H23 VTEC... SPECS...
I need to find specs on my motor... this is all I could find which is really nothing LOL.... could anyone help me out...
http://www.jdmcustoms.com/h22a018.html that is the link of my motor |
Re: H23 VTEC... SPECS... (H23_Del Sol)
what else are you looking for?
|
Re: H23 VTEC... SPECS... (2FAST4U831)
JDM H23A Vtec (blue top)
10.6-1 compression same as jdm H22A It has a jdm h22a head on it Has the same horsepower or even tad bit lower then the jdm h22a refering it to my near stock jdm h22a 158 ft lbs of torque at 3200 rpm and I am sure it would be less then 5 ft lbs of torque difference It wasn't enough of a power difference to get me to shell out the extra G The jdm h22a has better power capibilites and you can take it to higher rpms and just the straight reliability. |
H23A VTEC
Accord Sir Wagon (CH9) (JDM) 197hp@6800/163tq@5300 notes: 10.6:1 CR, open deck likely regular JDM H22a head. 95mm stroke Auto Tranny stock http://english.auto.vl.ru/catalog/11619/ |
H23 Del Sol this motor kicks ass if you dont already know.Dont listen to what anybody else says.This motor is by far better than a H22.
|
|
Very similar to my run.. i had 195 whp and 165 torque.....
|
Re: (H23aEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23aEG »</TD></TR><TR><TD CLASS="quote">H23 Del Sol this motor kicks ass if you dont already know.Dont listen to what anybody else says.This motor is by far better than a H22.</TD></TR></TABLE>
What's the difference? 95mm stroke, probably smaller bore. Same FRM sleeves? |
Re: (DarkKnight1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DarkKnight1 »</TD></TR><TR><TD CLASS="quote">
What's the difference? 95mm stroke, probably smaller bore. Same FRM sleeves?</TD></TR></TABLE> Acutally it has the same bore but bigger stroke. |
Subscribed. Finally a thread with info about the h23 vtec.
|
Re: (H23aEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23aEG »</TD></TR><TR><TD CLASS="quote">
Acutally it has the same bore but bigger stroke.</TD></TR></TABLE> So then what's the difference between this motor and a stroked h22? Nothing, so throw an H23 crank in an H22 and call it a day. What the hell makes one motor so much better than the other? |
Re: (DarkKnight1)
the only difference I see is maybe better weights on the crank and good location of the squirters...
|
All times are GMT -8. The time now is 04:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands